See3CAM_CU135M - 4K Monochrome USB 3.1 Gen 1 Camera

• Houses 13MP onsemi® AR1335 Image sensor
• Fixed Focus
• Output format: Y8 (8 bits/pixel) and Y16 (16 bits/pixel)
• Frame Rate: Streams Full HD @ 60 fps & 4K @ 30 fps
  Refer Datasheet for complete frame rate details.
• Supported OS: Windows, Linux, Android^* and MAC ^**
• USB 3.1 Gen 1 device with Type-C reversible interface connector
• UVC compliant: No additional drivers required. Also backward compatible with USB 2.0 hosts
• 10 pin GPIO Header
• External Hardware Trigger Input
• Unique ID for each camera
• Operating Voltage: 5V +/- 5%
• Operating Temperature Range: -30°C to 70°C
• Power requirements:
  • Max: 1.210W
  • Min: 0.780W
• Size in mm (l x b x h):
  • Without Lens: 30 x 30 x 30.2 mm
• Board Weight:
  • Without Lens: 13 Grams
  • With Lens: 21 Grams
• Compliance:
  • FCC
  • RoHS
• Lightweight, versatile, and portable two-board solution
• Launched on:
• * - Customers interested to work on Android would require e-con SDK (Webeecam). The specs mentioned above shall not be the same for Android
• ** - For MAC OS support, please contact sales@e-consystems.com

• Supported OS - Windows 10/8.1, Linux, Android * and MAC **
• Sample Application:
• • e-CAMView - Windows Camera application for Video Preview and Still Capture
  • QtCAM - Linux Camera application for Video Preview and Still Capture
• Still Image Resolutions:
• • All supported resolutions (Y8 & Y16)
• Still Capture:
• • External trigger signal control
  • Software application control
  • Software trigger
• UVC Controls:
• • Gain
  • Exposure (Manual)
  • Roll
• Additional Capabilities:
• • Stream Mode
  • Flash Mode
  • Orientation Mode
• * - Customers interested to work on Android would require e-con SDK (Webeecam). The specs mentioned above shall not be the same for Android
• ** - For MAC OS support, please contact sales@e-consystems.com

Ordering Info:

Customers who own platforms that support USB 3.1 Gen 1 and are interested in evaluating the 13MP USB camera module can directly buy the See3CAM_CU135M from e-con Systems.

Part No	Description	Sample Price (1 Unit)	Purchase
See3CAM_CU135_MHLCC_H01R1	13MP Fixed Focus USB 3.1 Gen 1 Monochrome Camera (With Auto Exposure)	USD 209
See3CAM_CU135_MHLCC_H03R1	13MP Fixed Focus USB 3.1 Gen 1 Monochrome Camera (Without Auto Exposure)	USD 189

In addition to See3CAM_CU135M, the evaluation kit comes with e-CAMView (Windows) / QtCAM (Linux) - Sample application for Video Preview and Still Capture along with the UVC Extension features (for Windows 8.1/10, Linux, Android * and MAC **). For more details, please refer the evaluation kit contents below.

For all enquiries please write to sales@e-consystems.com

Kit Contents:

• Hardware:
• • See3CAM_CU135M - 13MP Monochrome USB 3.1 Gen 1 Camera with M12 Lens (S-Mount) Holder
  • USB 3.1 Gen 1 Type-C Cable
  • Lens (Optional)
• Software: (Customers will have to download the software from e-con Developer Resource)
• • Supported OS: Windows 8.1/10, Linux, Android * and MAC **
  • e-CAMView (Windows) / QtCAM (Linux) - Video Preview and Still Capture Application
• * - Customers interested to work on Android would require e-con SDK (Webeecam). The specs mentioned above shall not be the same for Android
• ** - For MAC OS support, please contact sales@e-consystems.com

See3CAM_CU135M - Customization

• Do you need a Support for external mechanical shutter?
• Do you need a Custom lens mount (C-mount/CS-Mount)?
• Do you want a smaller form factor or single board solution?
• Do you need LED flash?
• Complete customization of firmware and hardware as per customer requirements. Please contact us for any customization and additional features.