e-CAM24_CUNX - Color Global shutter Camera for NVIDIA® Jetson Xavier™ NX / TX2 NX / Nano
e-CAM24_CUNX is a Full HD MIPI CSI-2 global shutter color camera for NVIDIA® Jetson Xavier™ NX / TX2 NX / Nano platforms. This camera is based on 1/2.6" AR0234CS global shutter CMOS Image sensor with well-tuned image signal processor (ISP). Its global shutter capability along with 120 fps frame rate help to minimize frame-to-frame distortion and reduce motion artifacts while capturing the scenes with lots of motion. The high SNR of this camera helps to capture excellent images even in low-light conditions. e-CAM24_CUNX can be directly connected to the MIPI CSI-2 connector of the below NVIDIA® Jetson platforms and software driver support is available for all these platforms.
Supported Platforms:
Jetson™ TX2 NX, Xavier NX & Nano
EN715 carrier board for Jetson Nano™ & Xavier NX
Photon AI Camera Platform for Jetson Nano™, TX2 NX & Xavier NX
- Houses e-CAM217_CUMI0234_MOD - Full HD Camera Module with S-mount lens holder
- Global Shutter
- Multi board solution
- High-speed MIPI CSI-2 interface to connect with the CPU
- Plugs in to NVIDIA® Jetson Xavier™ NX/ TX2 NX * / Nano Developer Kit
- Frame Rate:
-
Resolutions UYVY 320 x 240 120 fps 640 x 480 120 fps HD (1280 x 720) 120 fps Full HD (1920 x 1080) 65 fps 2.3MP (1920 x 1200) 60 fps - External Hardware Trigger Input **
- Operating Voltage : 3.3V +/- 5%, Current - 280mA
- Linux camera driver (V4L2) for 5.0 MP MIPI CSI-2 camera module
- Operating Temperature Range: -30°C to 70°C
- Power Consumption:
- Max: 0.92W
- Min: 0.66W
- Board Weight - 15 Grams (without lens)
21 Grams (with lens) - Size in mm (l x b): 30 x 30 mm
- Sample application for image capture & Preview
- Gstreamer-1.0 support for video recording and network streaming
- Lightweight, versatile, and portable design
- RoHS compliant
- Launched on:
- * - TX2 NX Tested only on NX carrier Board.
- ** - The camera module supports external trigger. Some customization is required to use the external trigger on Nvidia Xavier NX developer kit. Please contact camerasolutions@e-consystems.com.
Sensor:AR0234 Color sensor from onsemi@reg;
Sensor Resolution and Optical Format:Full HD CMOS Image Sensor. 1/2.6" Optical format
Sensor type:Full HD CMOS Global Shutter Sensor with Color output
Focus Type:Fixed focus
Image Signal Processor:Onboard ISP
Output Format:Uncompressed UYVY format
Sensor Features:
Pixel size:3μm x 3μm pixel
Sensor Active Area:1920H x 1200V
Responsivity:56 Ke-/luxsec
SNR:38 dB
Dynamic Range:71.4 dB
Shutter type:Global Shutter
Array Size:1920 x 1200 pixels
DFOV:128.2° (with the lens provided by e-con)
Linux camera driver:
Full-fledged Linux camera driver for MIPI CSI-2 camera module NVIDIA® Jetson Platforms.
- Supported Jetpack & L4T Version
-
- NVIDIA® Jetson Xavier™ NX - JetPack 4.6 L4T32.6.1
- NVIDIA® Jetson Nano™ - JetPack 4.6 L4T32.6.1
- NVIDIA® Jetson™ TX2 NX - JetPack 4.6 L4T32.6.1
- V4L2 Linux driver for MIPI CSI-2 camera module
-
- Video preview
- Still Image capture
- Camera controls via IOCTLs
- Sample application with source Code for Linux:
-
- Video Preview
- Still Image capture at selected resolutions
- Camera Controls
-
- Brightness
- Contrast
- Saturation
- White Balance (both manual and automatic)
- Gamma
- Gain
- Horizontal Flip
- Vertical Flip
- Sharpness
- Exposure (both manual and automatic)
- Digital Zoom
Please contact sales@e-consystems.com for any customization or porting of camera driver to your requirements.
Kit Contents:
-
- e-CAM217_CUMI0234_MOD - Full HD MIPI Camera Module with lens
- Adaptor board
- Flex Cable (15 cm)
- SD Card
- Linux Driver & Sample Application
- Please contact sales@e-consystems.com for any customization or porting of camera driver to your requirements.
e-CAM24_CUNX Documents
