See3CAM_CU20 - Full HD WDR HDR USB 3.1 Camera

• Key features:
• • Frame Rate:
    • Streams HD @ 45 fps , Full HD @ 30 fps & VGA @ 60fps
    Refer Datasheet  for complete frame rate details.
  • Output format: Uncompressed UYVY
  • Supported OS: Windows, Linux, Android* and MAC**
  • 10 pin and 5 pin GPIO header (Only for without enclosure)
  • External Hardware Trigger Input (Only for without enclosure)
  • Sensor Strobe output to connect external flash
  • Unique ID for each camera
  • Lightweight, versatile, and portable two-board solution
• Interface:
• • Interface:USB 3.1 Gen 1 device
  • Connector: Micro-B interface connector
  • UVC Compliant - no additional drivers required
  • Backward compatible with USB 2.0 hosts
• Module features:
• • Sensor: AR0230AT from onsemi®
  • Focus Type: Fixed focus
  • Sensor Resolution: Full HD
  • Chroma: Color
  • Shutter Type: Electronic Rolling Shutter with global reset mode ^#
  • Optical Format: 1/2.7"
  • Output Format: Uncompressed UYVY
  • Pixel Size: 3.0μm x 3.0μm pixel
  • Sensor Active Area: 1928(H) x 1088(V)
  • Array Size:1928 x 1088 pixel
  • Responsivity: 4.0 V/lux-sec
  • SNR: 41 dB
  • Dynamic Range: Max upto 96 dB
  • FOV: 128.99°(D), 110.95°(H), 60.62°(V) (with the lens provided by e-con)
• Electrical and Mechanical:
• • Operating Voltage: 5V +/- 5%
  • Operating Temperature Range: -40°C to 85°C
  • Power Requirements: Max : 2.07W, Min: 1.59W
  • Size in mm (l x b x h):
    • Without Enclosure:
      • Without Lens: 30 x 30 x 30.2 mm
    • With Enclosure:
      • Without Lens: 35.3 x 35.3 x 29 mm
  • Board Weight:
    • Without Enclosure:
      • Without Lens: 13 Grams
      • With Lens: 19 Grams
    • With Enclosure:
      • Without Lens: 57 Grams
      • With Lens: 63 Grams
• Miscellaneous:
• • Compliance: FCC, RoHS
• Launched on:
• * - Customers interested to work on Android would require e-con SDK (Webeecam). The specs mentioned above shall not be the same for Android
• **- For MAC OS support, please contact camerasolutions@e-consystems.com
• # - Rolling shutter is supported in the default firmware. Customized firmware/hardware is required to use a rolling shutter with Global reset mode.

• Supported OS - Windows 10/8.1, Linux, Android ^* and MAC ^**
• Sample Application:
• • eCAMView- Windows Camera application for Video Preview and Still Capture.
  • QtCAM - Linux Camera application for Video Preview and Still Capture.
• Still Image Resolutions:
• • 2 MP (JPG, BMP, RAW, PNG)
• Still Capture:
• • External trigger signal control ^***
  • Software application control
  • Software trigger
• UVC Controls:
• • Brightness
  • Contrast
  • Sharpness
  • Saturation
  • Gain
  • White Balance (Manual and Auto)
  • Exposure (Manual and Auto)
  • Pan & Tilt
  • Additional Capabilities:
  • • Exposure Compensation
    • Color Kill
    • Anti-Flicker-Modus
      • Auto Mode
      • Manual Mode
    • Orientation
      • Horizontal Mirror
      • Vertical flip
    • Sensor Mode
      • Standard Mode
      • HDR Mode
    • Effects
      • Normal
      • Gray scale
    • Burst Image Capture
    • Support for external trigger ^***
    • Denoising
• * - Customers interested to work on Android would require e-con SDK (Webeecam). The specs mentioned above shall not be the same for Android
• ** - For MAC OS support, please contact camerasolutions@e-consystems.com
• *** - Not applicable for camera with enclosure

Customers who own platforms that support USB 3.1 Gen 1 (5Gb/Sec.) and are interested in evaluating the Full HD High Dynamic Range USB camera module can directly purchase the See3CAM_CU20 from e-con Systems™. Customers can order See3CAM_CU20 with/without lens.

Part No	Description	Sample Price (1 Unit)	Purchase
See3CAM_CU20_CH (5s Pack)	Full HD USB 3.1 Gen 1(5Gb/Sec.) Camera with S-Mount Holder and Micro-B connector
See3CAM_CU20_CHL	Full HD Custom Lens USB 3.1 Gen 1(5Gb/Sec.) Camera with S Mount Holder, with Lens and Micro-B connector
See3CAM_CU20_CHL (5s Pack)	Full HD Custom Lens USB 3.1 Gen 1(5Gb/Sec.) Camera with S Mount Holder, with Lens and Micro-B connector
See3CAM_CU20_CHLBC_BX_H01R1	Full HD Custom Lens USB 3.1 Gen 1 Camera with S Mount Holder, with Lens, with enclosure and Micro-B connector

In addition to See3CAM_CU20, the evaluation kit comes with e-CAMView (Windows8.1/10) / QtCAM (Linux) - Sample application for Video Preview and Still Capture along with the UVC Extension features (for Windows 8.1/10, Linux, Android * and MAC **). For more details, please refer the evaluation kit contents below.

For all enquiries please write to sales@e-consystems.com

Kit Contents:

• Hardware:
• • See3CAM_CU20 - Full HD HDR USB Camera with M12 Lens (S-Mount) Holder
  • USB 3.1 Gen 1 Connector types: USB 3.1 Gen 1 Micro-B connector
  • Lens (Optional)
• Software: (Customers must download the software from e-con Developer Resource)
• • Supported OS: Windows, Linux, Android ^* and MAC ^**
  • e-CAMView (Windows) / QtCAM (Linux) - Video Preview and Still Capture Application
• Documents:
• • See3CAM_CU20 - Hardware and Software documents
• * - Customers interested to work on Android would require e-con SDK (Webeecam). The specs mentioned above shall not be the same for Android
• ** - For MAC OS support, please contact camerasolutions@e-consystems.com

See3CAM_CU20 – Customization

• Do you need a Support for external mechanical shutter?
• Do you need a Custom lens mount (C-mount/CS-Mount)?
• Do you want a smaller form factor or single board solution?
• Do you need LED flash?
• Complete customization of firmware and hardware as per customer requirements. Please contact us for any customization and additional features.