Multiple 4-lane 4K camera solution for Jetson Xavier NX FLOYD carrier board
We have partnered with Diamond Systems to provide a 4-lane multi-camera solution for Jetson Xavier NX using Diamond Systems’ Floyd carrier board. This Multi-camera solution is based on 13MP 4-lane MIPI CSI-2 Camera modules. This multi-camera solution allows customers to connect upto three 4-lane 4K Cameras on a single Jetson Xavier NX using Diamond Systems’ Floyd carrier board. Each 4K camera module is based on our flagship camera module based on AR1335 image sensor from ON Semiconductor® and a dedicated, high-performance Image Signal Processor (ISP). These 3 x (4-lane) MIPI camera modules can support simultaneous synchronization streaming in 4K resolution, which will be best fit for high end multi camera solution.
- Houses e-CAM137A_CUMI1335_MOD - 13MP Camera Module with S-mount lens holder
- Multi board solution
- High-speed MIPI CSI-2 interface to connect with the CPU
- Plugs in Diamond Systems FLOYD carrier board containing Jetson Xavier NX modules.
- Frame Rate:
-
Resolutions UYVY VGA (640x480) 115 fps HD (1280 x 720) 75 fps FHD (1920 x 1080) 75 fps 3840x2160 30 fps 4096x2160 28 fps 4192x3120 19 fps - *All frames rates are measured with single camera connected to Floyd carrier board.
- Operating Voltage : 3.3V +/- 5%, Current - 351mA
- Linux camera driver (V4L2) for 5.0 MP MIPI CSI-2 camera module
- Operating Temperature Range: -30°C to 70°C
- Power Consumption:
- Max : 1.62W
- Min : 0.95W
- Sample application for image capture & Preview
- Gstreamer-1.0 support for video recording and network streaming
- Lightweight, versatile, and portable design
- RoHS compliant
Camera Module Features:
Sensor:AR1335 from ON Semiconductor
Sensor Resolution and Optical Format:13MP CMOS Image Sensor. 1/3.2" Optical format
Sensor Type:13MP CMOS Electronic Rolling Shutter Sensor
Image Signal Processor:On-board high performance ISP
Output Format:Uncompressed UYVY format
Sensor Features:
Pixel size:1.1μm x 1.1μm pixel with BSI technology
Sensor Active Area:4208 (H) x 3120 (V)
Responsivity:4700 e-/lux-sec
SNR:37 dB
Dynamic Range:69 dB
Shutter type:Electronic Rolling Shutter
Focus Type:Fixed focus
Array Size:4208x3120
FOV: 110°(D), 86°(H), 64°(V) (with 1/3.2" AR1335)
The e-CAM130_CUNX is a MIPI camera and it requires a custom camera driver for Diamond Systems FLOYD carrier board containing Xavier NX modules. e-con Systems provides the camera driver along with the camera board.
- Supported Jetpack & L4T Version
-
- Jetson Xavier™ NX - JetPack 4.4 L4T32.4.3
- V4L2 Linux driver for MIPI CSI-2 camera module
-
- Video preview
- Still Image capture
- Camera controls via IOCTLs
- Sample application with source Code for Linux:
-
- Video Preview
- Still Image capture at selected resolutions
- Camera Controls
-
- Brightness
- Contrast
- Saturation
- White Balance (both manual and automatic)
- Gamma
- Gain
- Horizontal Flip
- Vertical Flip
- Sharpness
- Exposure (Manual, Automatic)
- Digital Zoom
- Pan
- Tilt
- iHDR
Please contact sales@e-consystems.com for any customization or porting of camera driver to your requirements.
Kit Contents:
-
- e-CAM137A_CUMI1335_MOD - 13MP MIPI Camera Module with lens
- Adaptor board
- Micro Coaxial Cable
- Please contact sales@e-consystems.com for any customization or porting of camera driver to your requirements.
e-CAM130_CUNX Documents
PRICE
Copyright © 2021 e-con Systems™ | Site Map