e-con-Video-Kanal

 
     
MIPI KameraPlatine  
     
 
 
 
Full HD GMSL2 HDR camera with LED Flicker Mitigation for Industrial applications
 
Introducing NileCAM21_CUXR, an AR0233 sensor based Full HD GMSL2 HDR camera with LED Flickering Mitigation allowing transmission of video data up to a distance of 15 meters.
Know More
 
 
 
     
 
 
 
Camera for UGV & Agriculture Automation
 
NileCAM21_CUXR, Multi camera solution for UGV & Agriculture Automation. NileCAM21_CUXVR is an AR0233 sensor based Full HD GMSL2 HDR camera with LED Flickering Mitigation allowing transmission of video data up to a distance of 15 meters.
Know More
 
 
 
     
 
 
 
Getting Started with NIleCAM21_CUXVR
 
NileCAM21_CUXVR is a Full HD color GMSL2 synchronized multi-camera solution featuring High Dynamic Range (HDR) and LED Flickering Mitigation (LFM). This camera kit is designed to work with NVIDIA® Jetson AGX Xavier™ developer kit with 15m coaxial cable. It is based on the 1/2.5" AR0233AT CMOS image sensor with new 3.0µm dual conversion gain BSI pixel technology from ON Semiconductor®. The NileCAM21_CUXVR is designed to stream 15m away from the NVIDIA® Jetson AGX Xavier™ developer kit (host processor) with very low latency.
Know More
 
 
 
     
 
 
 
Getting Started with e-CAM21_CUNX, Sony STARVIS IMX327 Ultra Low-Light MIPI Camera for NVIDIA® Jetson Xavier™
 
Getting Started with e-CAM21_CUNX, Sony STARVIS IMX327 Ultra Low-Light MIPI Camera for NVIDIA® Jetson Xavier™ NX developer Kit. This Full HD high-sensitivity lowlight camera has the capability of capturing both visible and near-infrared images with very low noise even at extremely low lighting conditions or no light (nearly 0 lux) conditions. It supports uncompressed Full HD streaming at 60 fps. This Starlight Camera uses NVIDIA® on-board Jetson Xavier NX Image Signal Processor (ISP) to perform all the Auto functions (Auto White Balance, Auto Exposure control) which significantly improves quality.
Know More
 
 
 
     
 
 
 
Getting Started with e-CAM80_CUNX
 
Getting Started with e-CAM80_CUNX, 8MP Ultra-lowlight MIPI CSI-2 camera capable of streaming 4K @ 44 fps. This 8MP camera is based on SONY STARVIS™ IMX415 CMOS image sensor. This Sony 4K camera can be directly connected with NVIDIA® Jetson Xavier NX developer kit and it uses NVIDIA® on-board Jetson Xavier NX Image Signal Processor (ISP) to perform all the Auto functions
Know More
 
 
 
     
 
 
 
Getting started with STURDeCAM20_CUXVR, IP67 Full HD GMSL2 HDR camera for Toshiba DME's Jetson AGX Xavier Edge AI Box.
 
STURDeCAM20 is an IP67 certified Full HD rugged camera with GMSL2 Interface. The sturdy enclosure makes this camera well suited for harsh outdoor environments. The STURDeCAM20 has an industrial-grade Full HD CMOS image sensor which together with a well-tuned Image Signal Processor (ISP) produces exceptional image quality.
Know More
 
 
 
     
 
 
 
Getting started e-CAM131_CUNX, 13MP (4K) Ultra HD camera for NVIDIA® Jetson Xavier™
 
Getting started e-CAM131_CUNX, 13MP (4K) Ultra HD camera for NVIDIA® Jetson Xavier™ NX/NVIDIA® Jetson Nano™ developer kit. e-CAM131_CUNX is based on 13 MP AR1335 CMOS Image sensor from ON Semiconductor®. This 4K MIPI camera can be developed by any V4L2 application. The high resolution MIPI camera can be directly connected to the MIPI CSI-2 interface on the NVIDIA® Jetson Xavier™ NX/NVIDIA® Jetson Nano™ developer kit.
Know More
 
 
 
     
 
 
 
Getting started with e-CAM20_CUIMX8
 
Getting started with e-CAM20_CUIMX8, 2MP fixed focus Sony® STARVIS™ IMX290 Ultra-Lowlight Camera for Toradex Apalis iMX8 Quad Max (iMX8QM) System on Module (SoM). The e CAM20_CUIMX8 camera is interfaced directly to the CSI-2 MIPI interface on the Toradex's Ixora carrier board for Apalis iMX8QM SOM.
Know More
 
 
 
     
 
 
 
STURDeCAM20, the IP67 Full HD GMSL2 HDR camera for Autonomous Mobile Robots in Warehouse Management and Patrol Robots.
 
The STURDeCAM20 is based on an industrial grade image sensor with a well-tuned image signal processor (ISP) packed in an IP67 rated (water and dustproof) enclosure with an operating temperature of -40 to 85°C. It can produce seamless high-quality video streaming with very low latency, that has been created specifically for industrial and outdoor environments.
Know More
 
 
 
     
 
 
 
Getting Started with e-CAM24_CUNX - Global Shutter Color Camera for Jetson Xavier NX
 
Getting Started with e-CAM24_CUNX, a Full HD MIPI CSI-2 global shutter color camera for NVIDIA® Jetson Xavier™ NX/NVIDIA® Jetson Nano™ developer Kit. This camera is based on 1/2.6" AR0234CS global shutter CMOS image sensor with well-tuned image signal processor (ISP).
Know More
 
 
 
     
 
 
 
Global shutter Color Camera for NVIDIA Jetson Xavier NX / Jetson Nano developer Kit
 
Introducing e-CAM24_CUNX, a Full HD MIPI CSI-2 global shutter color camera for NVIDIA® Jetson Xavier™ NX/NVIDIA® Jetson Nano™ developer Kit.
Know More
 
 
 
     
 
 
 
Getting Started with e-CAM130_CURB - 13MP (4K) MIPI CSI-2 Camera for Raspberry Pi 4
 
Getting Started with e-CAM130_CURB, 4K High Quality Camera MIPI CSI-2 Camera for Raspberry Pi 4. This Raspberry Pi high resolution camera is based on 1/3.2" AR1335 CMOS image sensor from ON Semiconductor® and has a dedicated, high-performance Image Signal Processor (ISP) that performs all the Auto functions like auto white balance, auto exposure control in addition to complete image signal processing pipeline that provides best-in-class images and video and the optional MJPEG compression.
Know More
 
 
 
     
 
 
 
4K camera for Raspberry Pi 4 | 13MP High Quality MIPI CSI-2 Camera for Raspberry Pi
 
Introducing e-CAM130_CURB, Ultra HD 4K 13MP MIPI CSI-2 Camera for Raspberry Pi 4. This Raspberry Pi High Resolution camera is based on 1/3.2" AR1335 CMOS image sensor from ON Semiconductor® and has a dedicated, high-performance Image Signal Processor (ISP) that performs all the Auto functions like auto white balance, auto exposure control in addition to complete image signal processing pipeline that provides best-in-class images and video and the optional MJPEG compression.
Know More
 
 
 
     
 
 
 
Getting started: Sony Starvis IMX327 Ultra Low Light Camera for Jetson AGX Xavier
 
Getting started with e-CAM22_CUXVR, Full HD Sony STARVIS IMX327 ultra Low Light Camera for NVIDIA® Jetson AGX Xavier™ developer kit.
Know More
 
 
 
     
 
 
 
Sony STARVIS IMX327 Ultra Low Light Full HD Camera for NVIDIA Jetson AGX Xavier
 
Introducing e-CAM22_CUXVR, Full HD Sony STARVIS IMX327 ultra Low Light Camera for NVIDIA® Jetson AGX Xavier™ developer kit. This MIPI camera solution is empowered with ultra low light sensitivity, higher signal to noise ratio, and uncompressed Full HD streaming at 60 fps.
Know More
 
 
 
     
 
 
 
Getting started with e-CAM50_CUIMX8 - 5MP camera for Toradex Apalis iMX8QM SoM
 
Getting started with e-CAM50_CUIMX8, 5MP fixed focus color camera for Toradex Apalis iMX8 Quad Max (iMX8QM) System on Module (SoM). The e-CAM50_CUIMX8 camera is interfaced directly to the CSI-2 MIPI interface on the Toradex's Ixora carrier board for Apalis iMX8QM SOM
Know More
 
 
 
     
 
 
 
Embedded Vision cameras for Toradex Apalis i.MX8 Quad Max System on Module (SoM)
 
e-con Systems have partnered with the leading SOM manufacturer, Toradex to facilitate our customers with quality embedded vision products. We have launched a bouquet of MIPI CSI-2 camera module for Toradex's i.MX8 SoM series, Apalis.
Know More
 
 
 
     
 
 
 
Getting started with e-CAM131_CUIMX8 - 13MP camera for Toradex Apalis iMX8QM SoM
 
Getting started with e-CAM131_CUIMX8, 13MP fixed focus color camera for Toradex Apalis iMX8 Quad Max (iMX8QM) System on Module (SoM). The e-CAM131_CUIMX8 camera is interfaced directly to the CSI-2 MIPI interface on the Toradex's Ixora carrier board for Apalis iMX8QM SOM.
Know More
 
 
 
     
 
 
 
Surround View Camera for Industrial & Commercial Vehicles | Fleet Management Systems
 
e-con Systems™ announces STURDeCAM20 surround view camera for industrial vehicles. STURDeCAM20 is a Full HD rugged GMSL2 camera with I5 meters cable support. The STURDeCAM20 is based on an industrial grade Full HD image sensor with a well-tuned image signal processor (ISP) packed in an IP67 rated (water and dustproof) enclosure with an operating temperature of -40 to 85°C.
Know More
 
 
 
     
 
 
 
Industrial grade IP67 Full HD GMSL2 HDR camera for NVIDIA Jetson AGX Xavier
 
Introducing STURDeCAM20_CUXVR - Industrial grade IP67 Full HD camera solution with a GMSL2 interface for NVIDIA® Jetson AGX Xavier™ developer kit. STURDeCAM20_CUXVR contains the STURDeCAM20 - Full HD IP67 certified camera with high-performance Image Signal Processor chip (ISP), GMSL adapter board, and an IP67 certified coaxial cable up to 15 meters with a FAKRA connector.
Know More
 
 
 
     
 
 
 
Getting Started: IP67 Full HD GMSL2 HDR camera for NVIDIA Jetson AGX Xavier
 
Getting started with STURDeCAM20_CUXVR, IP67 industrial grade Full HD camera solution with GMSL2 interface for NVIDIA® Jetson AGX Xavier™ developer kit. STURDeCAM20_CUXVR contains the STURDeCAM20 - Full HD IP67 certified camera with high-performance Image Signal Processor chip (ISP), GMSL adapter board, and an IP67 certified coaxial cable up to 15 meters with FAKRA connector.
Know More
 
 
 
     
 
 
 
GMSL2 Multi Camera solution for Rudi-NX Embedded System with NVIDIA Jetson Xavier NX
 
Watch the real time demo of STURDeCAM20, the surround view camera for industrial and commercial vehicles. STURDeCAM20 is a IP67 Full HD GMSL2 HDR camera for Connect Tech's Rudi-NX Embedded System with NVIDIA Jetson Xavier NX platform.
Know More
 
 
 
     
 
 
 
Camera for Embedded Imaging & Vision Applications | 5MP camera for Jetson Xavier NX
 
e-CAM50_CUNX is a 5MP MIPI camera for Embedded Imaging & Vision Applications. e-CAM50_CUNX is the 5MP MIPI CSI-2 fixed focus color camera for the latest NVIDIA Jetson Xavier NX platform enabling edge-AI solutions comes with the out of the box camera evaluation allowing rapid prototyping and development. e-con Systems’ expertise in embedded Imaging solutions enables support to the development of critical solutions.
Know More
 
 
 
     
 
 
 
Getting started with e-CAM50_CUNX - Camera for NVIDIA Jetson Xavier NX Developer Kit
 
Getting started with e-CAM50_CUNX , the 5 MP MIPI camera for the latest NVIDIA Jetson Xavier NX platform enabling edge-AI solutions comes with the out of the box camera evaluation allowing rapid prototyping and development
Know More
 
 
 
     
 
 
 
Introducing e-CAM50_CUCRL - 5MP MIPI Camera for Google Coral
 
We are delighted to announce the launch of e-CAM50_CUCRL - 5MP MIPI Camera for Google Coral. Know More
 
 
 
     
 
 
 
Getting Started with e-CAM50_CUCRL - 5MP MIPI Camera for Google Coral
 
Watch the video of Getting Started with e-CAM50_CUCRL - 5MP MIPI Camera for Google Coral. Know More..
 
 
 
     
 
 
 
Introducing e-CAM30_CUCRL - 3MP MIPI Camera for Google Coral
 
We are delighted to announce the launch of e-CAM30_CUCRL - 3MP MIPI Camera for Google Coral. Know More...
 
 
 
     
 
 
 
Getting Started with e-CAM30_CUCRL - 3MP MIPI Camera for Google Coral
 
Watch the video of Getting Started with e-CAM30_CUCRL - 3MP MIPI Camera for Google Coral. Know More..
 
 
 
     
 
 
 
Pose Estimation on the Edge with e-con's Camera for Google Coral Development Board
 
Watch the demo of Pose Estimation on the Edge with e-con's Camera for Google Coral Development Board. Know more..
 
 
 
     
 
 
 
Introducing e-CAM50_CU96 - 5MP MIPI camera for Rockchip RK3399 based Rock960 board
 
e-CAM50_CU96 is a 5MP Fixed focus MIPI camera for 96Boards compliant Rock960 developer kit featuring Rockchip RK3399 processor. For more information, please visit : 5MP MIPI camera for Rockchip RK3399
 
 
 
     
 
 
 
"Streams at 100fps with lesser Noise" Introducing MIPI Camera for NVIDIA Jetson Nano | e-con Systems
 
Introducing e-CAM50_CUNANO - 5MP MIPI Camera for NVIDIA Jetson Nano Developer Kit which streams at 100fps with lesser Noise. This e-CAM50_CUNANO is based on 1/2.5" inch AR0521 CMOS Image sensor from ON Semiconductor® with built-in Image Signal Processor (ISP). For more information, please visit : 5MP Camera for NVIDIA® Jetson Nano™
 
 
 
     
 
 
 
5MP MIPI camera for NVIDIA® Jetson Nano™
 
e-CAM50_CUNANO is a 5MP 2-lane MIPI CSI-2 fixed focus color camera for NVIDIA® Jetson Nano™ developer Kit. This camera is based on 1/2.5 inch AR0521 CMOS Image sensor from ON Semiconductor® with built-in Image Signal Processor (ISP). For more information, please visit : 5MP Camera for NVIDIA® Jetson Nano™
 
 
 
     
 
 
 
DeepStream SDK 4.0 in SurveilsQUAD for Parking Lot Management
 
Watch the video of DeepStream SDK 4.0 in SurveilsQUAD for Parking Lot Management. SurveilsQUAD (e-CAM20_CUXVR) is a multiple camera solution that consists of four 2MP camera board and a base board to interface with the NVIDIA® Jetson AGX Xavier™ Developer Kit. Each camera is based on the e-con's popular camera module e-CAM21_CUMI290_MOD, a SONY® Starvis IMX290 color CMOS image sensor. For more information, please visit : Sony IMX290 Synchronized Multi-Camera System
 
 
 
     
 
 
 
Demo : e-CAM130A_TRICUTX2 (TRICamera) - 4K Multi-Camera System at ISS2019 | e-con Systems
 
Watch the demo of TRICamera - 4K Multi-Camera System for NVIDIA® Jetson TX1/TX2 developer kit at IMAGE SENSING SHOW 2019 (ISS2019). For more info, visit : 4K Multi-Camera System (TRICAM)
 
 
 
     
 
 
 
e-con Systems at ISS2019 | IMAGE SENSING SHOW 2019
 
Mr. Atsuhiko Saito, President of Silicon Device, Inc talks about e-con Systems' OEM Cameras and their capabilities in the Image Sensing Show (ISS). For more info, visit : OEM Camera Manufacturer | e-con Systems
 
 
 
     
 
 
 
Getting started with SurveilsQUAD - Synchronized Multi-Camera System for NVIDIA® Jetson Xavier™
 
Watch the video of Getting started with SurveilsQUAD - Synchronized Multicamera System. SurveilsQUAD (e-CAM20_CUXVR) is a multiple camera solution for NVIDIA® Jetson AGX Xavier™ Developer Kit that consists of four 2MP camera board and a base board to interface with the NVIDIA® Jetson AGX Xavier™ Developer Kit.Each camera is based on the camera module e-CAM21_CUMI290_MOD, a SONY® Starvis IMX290 color CMOS image sensor. Know More : Sony IMX290 Synchronized Multi-Camera System
 
 
 
     
 
 
 
Machine Learning based Image Classifier using e-CAM30_CUNANO on NVIDIA® Jetson NANO™ Developer Kit
 
Watch the demo of Machine Learning based Image Classifier using e-CAM30_CUNANO on NVIDIA® Jetson NANO™ Developer Kit. Know More : 3.4 MP NVIDIA® Jetson NANO™ Camera
 
 
 
     
 
 
 
e-con cameras at ESC 2019 | iMX8 Camera, Jetson Nano Camera, Ultra-Low Light HDR Camera
 
e-con Systems' USB Cameras and MIPI Cameras demo at ESC 2019, Boston, MA.
iMX8 Camera : e-CAM130_iMX8
NVIDIA® Jetson Nano™ Camera : e-CAM30_CUNANO
Ultra-Low Light HDR Camera : Hyperyon®
 
 
 
     
 
 
 
Getting started with e-CAM130_iMX8 - 13MP Autofocus Camera Board for i.MX8
 
Watch the video of Getting started with e-CAM130_iMX8 - 13MP Autofocus Camera Board for i.MX8. e-CAM130_iMX8 is a 13MP 4-lane MIPI CSI-2 autofocus color camera board for i.MX8 family of processors. The e-CAM130_iMX8 camera board is interfaced directly to the CSI-2 MIPI interface on the Variscite's DART-MX8M Evaluation kit (VAR-DVK-DT8M). Know More :13MP MIPI i.MX 8M Camera board
 
 
 
     
 
 
 
Color Segmentation using e-CAM130_iMX8 - 13MP Autofocus Camera Board for i.MX8
 
Watch the demo of Color Segmentation using e-CAM130_iMX8 - 13MP Autofocus Camera Board for i.MX8. e-CAM130_iMX8 is a 13MP 4-lane MIPI CSI-2 autofocus color camera board for i.MX8 family of processors. The e-CAM130_iMX8 camera board is interfaced directly to the CSI-2 MIPI interface on the Variscite's DART-MX8M/DART-MX8M-MINI Evaluation kit (VAR-DT8McustomBoard). Know More : 13MP Camera board for i.MX8
 
 
 
     
 
 
 
Demo: 360° Video Stitching using TRICAM with NVIDIA® Jetson TX2 Development Kit | GTC'19
 
Watch the demo of 360° Video Stitching using TRICAM with NVIDIA® Jetson TX2 Development Kit at NVIDIA's GPU Technology Conference (GTC'19). Know More : 4K Multi-Camera System (TRICAM)
 
 
 
     
 
 
 
Camera for NVIDIA® Jetson NANO™ developer Kit | Getting Started with e-CAM30_CUNANO
 
e-CAM30_CUNANO is a 3.4 MP 2 lane MIPI CSI-2 custom lens camera board for NVIDIA® Jetson NANO™ developer Kit. This camera is based on 1/3" inch AR0330 CMOS Image sensor from ON Semiconductor® with 2.2 µm pixel.Watch the getting started video of e-CAM30_CUNANO
 
 
 
     
 
 
 
People Detection & Tracking in e-CAM30_CUNANO - NVIDIA® Jetson NANO™ Developer Kit
 
Watch the demo of People Detection & Tracking in e-CAM30_CUNANO - 3.4 MP NVIDIA® Jetson NANO™ Developer Kit. e-CAM30_CUNANO can stream uncompressed full HD at 60fps. Know More : 3.4 MP Camera for NVIDIA® Jetson NANO™
 
 
 
     
 
 
 
Demo: 3.4 MP Camera for NVIDIA® Jetson NANO™ Development Kit | GTC'19 | e-con Systems
 
e-CAM30_CUNANO is a 3.4 MP 2 lane MIPI CSI-2 custom lens camera board for NVIDIA® Jetson NANO™ developer Kit. This camera is based on 1/3" inch AR0330 CMOS Image sensor from ON Semiconductor® with 2.2 µm pixel. Watch the demo of e-CAM30_CUNANO - 3.4 MP NVIDIA® Jetson NANO™ Camera at NVIDIA's GPU Technology Conference Read more: 3.4 MP NVIDIA® Jetson NANO™ Camera
 
 
 
     
 
 
 
Four Camera Board for NVIDIA Jetson AGX Xavier | e-CAM130A_CUXVR | e-con Systems
 
Watch the demo video of e-CAM130A_CUXVR - Four Camera Board for NVIDIA Jetson AGX Xavier. In e-CAM130A_CUXVR, each camera is based on the camera module e-CAM137_CUMI1335_MOD, 1/3.2" AR1335 color CMOS image sensor from ON Semiconductor® and integrated high-performance Image Signal Processor (ISP). Read more: four-synchronized-4k-kameras-de.asp
 
 
 
     
 
 
 
Demo: Autonomous Vehicle powered with TaraXL Stereo Camera & NVIDIA TX2 | e-con Systems
 
Watch the demo of Autonomous Vehicle using TaraXL & NVIDIA TX2 for its Vision Processing, driving autonomously avoiding obstacles and navigating the area with its stereo vision.
 
 
 
     
 
 
 
Smart Checkout Solution using Smart Camera | e-con Systems
 
Barcodes are going to be history soon. Don't believe it!! Watch this demo of smart billing where SmarteCAM uses edge AI to detect objects on the conveyor and bills all by itself.
 
 
 
     
 
 
 
People Detection and Tracking using Smart Camera | e-con Systems>
 
The People Counting and Tracking software enables SmarteCAM to detect people, count and track entry and exit of people. An essential for every smart security and analytics.
 
 
 
     
 
 
 
OEM Smart Camera with Intelligent Output | e-con Systems
 
SmarteCAM is a programmable OEM Smart Camera with NVIDIA Tegra TX2 and Linux at its core and e-CAM30_CUMI0330_MOD as its eye. Customers can program the smart camera with their own computer vision algorithms and AI models and customize the SmarteCAM for their use case. Read more: www.e-consystems.com/smart-camera.asp
 
 
 
     
 
 
 
Demo: 4K Autofocus MIPI Camera for eSOMiMX6PLUS | e-con Systems
 
ACC-iMX6-MI1335CAM is a 13MP 4K Camera board for e-con's AnkaaPLUS i.MX6 RDK. This AR1335 sensor based Autofocus Camera provides 4-lane MIPI CSI-2 interface. Read More : www.e-consystems.com/iMX6-quad-plus-dual-plus-core-development-board.asp#accessories
 
 
 
     
 
 
 
4K Autofocus MIPI Camera for NVIDIA Jetson TX1/TX2 | e-con Systems
 
e-CAM132_TX2 - 13MP Autofocus Jetson TX2/TX1 camera board is a 4-lane MIPI CSI-2 camera solution for NVIDIA® Jetson TX2/TX1 developer kit. Readmore: www.e-consystems.com/13mp-autofocus-nvidia-jetson-tx2-camera-board.asp
 
 
 
     
 
 
 
4K Multi-Camera Synchronization demo on NVIDIA Jetson TX2/TX1 | e-con Systems
 
e-CAM130A_TRICUTX2 is a 4K synchronized multi-camera system for NVIDIA® Jetson TX1/TX2 developer kit.
 
 
 
     
 
 
 
Multiple camera solution for NVIDIA® Jetson TX1/TX2 - Getting started demo | e-con Systems
 
e-CAM130A_TRICUTX2 (TRICamera) is a multiple camera solution for NVIDIA® Jetson TX1/TX2 developer kit.
 
 
 
     
 
 
 
Low-light comparison of e-CAM21_CUTX2 vs Normal Camera at both Indoor and Outdoor
 
low-light comparison of the e-CAM21_CUTX2 is demonstrated in this video. Read More information at https://www.e-consystems.com/jetson-tx2-ultra-low-light-camera-board.asp
 
 
 
     
 
 
 
Getting Started with e CAM21_CUTX2: Sony IMX290 camera for NVIDIA Jetson TX2
 
2MP ultra-low light Sony STARVIS IMX290 based MIPI camera for NVIDIA Jetson TX2. Read More information at https://www.e-consystems.com/jetson-tx2-ultra-low-light-camera-board.asp
 
 
 
     
 
 
 
Getting Started with e-CAM80_IMX7 - 8MP Autofocus MIPI Camera for i.MX7
 
e-CAM80_IMX7 is a 8MP Autofocus MIPI camera board for NXP® i.MX7 SABRE Development kit. Read More information at https://www.e-consystems.com/imx7-mipi-camera-board.asp
 
 
 
     
 
 
 
Demo: 2MP Sony IMX290 Ultralow Light Camera for Jetson TX2 @ ESC 2017
 
2MP ultra low light 4-lane MIPI CSI-2 camera board for NVIDIA® Jetson TX2/TX1 developer kit. Read More information at https://www.e-consystems.com/jetson-tx2-ultra-low-light-camera-board.asp
 
 
 
     
 
 
 
13MP NVIDIA Jetson TX2 Camera - e-CAM131_CUTX2
 
e-CAM131_CUTX2 is a 13MP 4-lane MIPI CSI-2 fixed focus camera board for NVIDIA® Jetson TX2/TX1 developer kit. Read More information at https://www.e-consystems.com/13mp-nvidia-jetson-tx2-kamera-board-de.asp
 
 
 
     
 
 
 
Demo: e-CAM30_HEXCUTX2 - Six 3.4 MP Camera for NVIDIA Jetson TX1/TX2
 
e-CAM30_HEXCUTX2 is a multiple camera solution for NVIDIA® Jetson TX1/TX2 developer kit. Read More information at https://www.e-consystems.com/multiple-csi-cameras-for-nvidia-jetson-tx2-de.asp
 
 
 
     
 
 
 
3.4 MP Liquid Lens Autofocus Jetson TX2 Camera
 
e-CAM31_TX2 is a 3.4 MP 4-lane MIPI CSI-2 liquid lens Auto focus camera board for NVIDIA® Jetson TX2 developer kit. Read More information at https://www.e-consystems.com/autofocus-liquid-lens-nvidia-jetson-tx2-kamera-de.asp
 
 
 
     
 
 
 
Webinar Recording: e-con cameras for NVIDIA Jetson TX1/TX2
 
Webinar Recording: e-con cameras for NVIDIA Jetson TX1/TX2. Read More information at https://www.youtube.com/watch?v=YVHQg7pzSxM
 
 
 
     
 
 
 
Live Demo : Multiple Camera solution for Nvidia Jetson TX1/TX2 at ESC Boston 2017
 
Live Demo : Multiple Camera solution for Nvidia Jetson TX1/TX2 at ESC Boston 2017. Read More information at https://www.youtube.com/watch?v=30Qf8zw2qjQ
 
 
 
     
 
 
 
3.4 MP MIPI Camera for NVIDIA Jetson TX1
 
3.4 MP 4 lane MIPI CSI-2 custom lens camera board for NVIDIA® Jetson Tegra X1 Development Kit. Read More information at https://www.e-consystems.com/3MP-Jetson-TX1-Kamera-board-de.asp
 
 
 
     
 
 
 
13MP MIPI camera for NVIDIA Jetson TX1
 
13MP MIPI camera based on AR1820HS camera module streaming on Jetson TX1 Kit. Read More information at https://www.e-consystems.com/13mp-nvidia-jetson-tx1-kamera-board-de.asp
 
 
 
     
 
 
 
6 MIPI CSI-2 Cameras support for NVIDIA Jetson TX1
 
Each 3.4MP AR0330 camera module, streams uncompressed video 1080p at 30fps. https://www.e-consystems.com/blog/camera/6-mipi-csi-2-cameras-support-for-jetson-tx1/
 
 
 
     
 
 
 
13MP MIPI camera board for NVIDIA Jetson TX1
 
e-CAM130_CUTX1 - 13MP MIPI camera daughter board for the NVIDIA Jetson TX1 development kit. https://www.e-consystems.com/13mp-nvidia-jetson-tx1-kamera-board-de.asp
 
 
 
     
 
 
 
13MP MIPI-Kamerakarte für NVIDIA Tegra K1 auf Basis des Jetson DevKit
 
Die e-CAM130_CUTK1 ist eine 13,0-Megapixel-4-Lane-MIPI CSI-2-Kamera für die NVIDIA Tegra K1-CPU. Die e-CAM130_CUTK1 ist mit einem 13MP-Kameramodul und einer Adapterplatine für die Verbindung der Kamera mit dem Jetson TK1-Entwicklerkit ausgestattet. Das Jetson TK1-Entwicklerkit ist eine vollständige Plattform für eingebettete Tegra K1-Anwendungen. Die e-CAM130_CUTK1-Kamera wird über die Schnittstelle 4-Lane-MIPI-CSI-2 mit dem Jetson-Entwicklerkit verbunden.
 
 
 
     
 
 
 
8 Megapixel Autofokus MIPI-Kameramodul
 
e-CAM80_MI8825_MOD ist das 8-MP-HD-MIPI_Kameramodul von e-con Systems mit Omnivision OV8825-Bildsensor. Alle Prozessorsysteme, u. a. I.MX6, OMAP4430, OMAP4460 mit MIPI CSI-2, können direkt mit dem e-CAM80_MI8825_MOD verbunden werden.
 
 
 
     
 
 
 
e-CAM51IMX6 - 5-MP-MIPI-Kamerakarte für Wandboard
 
Die e-CAM51IMX6 ist die iMX6-Kameratochterkarte (MIPI) von e-con Systems für das Wandboard - NXP®/Freescale® i.MX6 Prozessor basierten Single Board Computer. Die e-CAM51IMX6 nutzt das 5-Megapixel-Autofokus-Kameramodul mit dem OV5640 CMOS-Bildsensor von OmniVision® und ist über eine Schnittstelle zu i.MX6 CPU durch MIPI® CSI-2-Schnittstelle.
 
 
 
     
 
 
 
Video Streaming Over SoftAP from WandBoard with e-CAM51IMX6
 
The video demonstrates the Streaming Video over SoftAP from WandBoard with e-CAM51IMX6 - 5MP i.MX6 camera. Targeted for application such Retail Analytics, Surveillance etc
 
 
 
     
 
 
 
5-MP-MIPI-Kamerakarte für SABRE Lite-Entwicklerkit
 
Die e-CAM50IMX6 ist die iMX6-Kameratochterkarte (MIPI) von e-con Systems für das Freescale® SABRE Lite-Entwicklerkit. Die e-CAM50IMX6 nutzt das 5-Megapixel-Autofokus-Kameramodul mit dem OV5640 CMOS-Bildsensor von OmniVision und ist über eine Schnittstelle zu i.MX6 CPU durch MIPI CSI-2-Schnittstelle.
 
 
 
     
 
 
 
Erste Schritte mit e-CAM51_44x - 5 MP MIPI Kameraplatine für TI OMAP4-Prozessoren
 
Die e-CAM51_44x ist eine OMAP4 MIPI-Kameratochterkarte von e-con Systems für das PandaBoard. Die e-CAM51_44x arbeitet mit einem 5-Megapixel-Autofokus-Kameramodul mit dem OmniVision OV5640 CMOS-Bildsensor; diese OMAP4-Kamerakarte ist lediglich für die MIPI-CSI-2-Schnittstelle ausgelegt. Dieses Video ermöglicht, mit dem e-CAM51_44x loslegen.
 
 
 
     
 
 
 
5 MP MIPI CSI-2 TI OMAP4 Kameraplatine | PandaBoard-Kameraplatine
 
e-con Systems kündigt die Full HD MIPI-Kameraplatine, e-CAM51_44x für die Prozessorenfamilie OMAP4 von Texas Instruments an. e-CAM51_44x ist Über eine Schnittstelle mit dem PandaBoard verbunden, das mit dem OMAP4430/OMAP4460-Prozessor ausgestattet ist, und verfügt Über e-CAM57_MI5640_MOD, ein 5-Megapixel-Autofokus-MIPI CSI-2-Kameramodul, das auf dem OV5640-Sensor von OmniVision basiert.
 
 
 
     
 
 
 
MIPI-Kameraplatine für AM37x-/DM37x-Prozessoren von TI.
 
e-CAM55_37x ist das weltweit erste MIPI CSI-2-Kamera-Referenzdesign für die AM37x-/DM37x-Prozessoren von TI und arbeitet mit dem Zoom™ DM3730 SOM-LV Entwickler-Kit von Logic PD zusammen. e-CAM55_37x nutzt das 5-Megapixel-Autofokus-Kameramodul mit dem OV5640 CMOS-Bildsensor von OmniVision. Die Kameraplatine ist für eine MIPI-CSI-2-Schnittstelle ausgelegt.
 
 
 
     
 
 
 
Windows Embedded Compact 2013 Camera Solutions
 
e-con Systems offers Camera solutions on Windows Embedded Compact 2013. Video shows a 5MP camera streaming on to the LCD of the TI DM3730 based EVM. econsystems offers various development solutions in windows CE
 
 
 
     
DaVinci KameraPlatine  
     
 
 
 
Kamera-Karte für Texas Instruments DaVinci Prozessor
 
Dieses Video Über e-con die Kamera Daughter Board e-CAM50_DM37x, eine 5MP HD Kamera-Lösung für TI AM/DM37x EVM Vorstand mit DaVinci DM37x und Sitara die AM37x Prozessoren.
 
 
 
     
OMAP KameraPlatine  
     
 
 
 
e-CAM32_OMAP_GSTIX Kameraplatine
 
Die e-CAM32_OMAP_GSTIX-Erweiterungsplatine, eine 3,2 Megapixel-Kamerakarte von e-con Systems, ist eine Plug-und-Play-Karte für alle Gumstix® Overo® Computer-On-Module (COM).
 
 
 
     
 
 
 
Demonstration der Videoaufzeichnung auf Gumstix Overo COM per e-CAM50_OMAP_GSTIX
 
Die e-CAM50_OMAP_GSTIX Erweiterungskarte ist e-con Systems 5,0-Megapixel-Kamera, die Platine-Plug-and-Play funktioniert mit jedem Gumstix® Overo® Computer-on-Module (COM).
 
 
 
     
 
 
 
OMAP Kamera Hardware Software EVM kit
 
e-CAM32_OMAP35x ist e-con 3,2 Mega Pixel Kamera-Lösung für äusserst erfolgreiche OMAP35x Prozessoren von Texas Instruments. Die e-CAM32_OMAP35x ist ein Add-On-Modul, das eine 3,2-Megapixel-Kamera mit Autofokus-Funktionen zusammen mit einer Schaltung für LED-Blitzen beherbergt. Die e-CAM32_OMAP35x können direkt Über Schnittstellen auf der TI TMDSEVM3530 EVM Platine.
 
 
 
     
 
 
 
e-CAM32_OMAP_GSTIX Camera Module
 
e-CAM32_OMAP_GSTIX camera module has e-con Systems' 3.2 Megapixel camera which works plug and play with every Gumstix® Overo™ computer-on-module powered by OMAP Applications Processor and has 27 pin header to interface.
 
 
 
     
     
 
 
 
Introducing e-CAM83_CUMI415_MOD, 8MP Ultra-lowlight MIPI CSI-2 camera module capable of streaming 4K @ 90 fps.
 
This 4K camera module is based on SONY STARVIS™ IMX415 CMOS image sensor. Its low light sensitivity delivers exceptional clear color images even at extremely low light or even no light (nearly 0 lux) conditions. It is capable of streaming high frame rate (90 fps) at 4K (3840 x 2160) resolution.
 
 
 
     
 
 
 
Low noise comparison: ON Semiconductor 1/2.5" inch AR0521 v 1/3" inch AR0330
 
Watch the low noise comparison in various light conditions between ON Semiconductor's 1/2.5" inch AR0521 CMOS Image sensor and 1/3" inch AR0330 CMOS Image sensor. Read more information at 5mp-ar0521-mipi-kameramodul-de.asp
 
 
 
     
 
 
 
OV4682 RGB IR MIPI camera module | Multi Spectral High frame rate camera, Streams up to 330 FPS
 
See3CAM_CU40, the industry's first RGB-IR pixel format camera with a USB 3.0 UVC interface, and the e-CAM40_CUMI4682_MOD, a stand-alone MIPI CSI-2 module. Read more information at https://www.e-consystems.com/OV4682-RGB-IR-MIPI-Kameramodul-de.asp
 
 
 
     
 
 
 
Lesen Mikrodrucke auf einem Dollar Bill mit e-con e-CAM50_CU5642_MOD
 
eine kleine Form-Factor Pluggable-Kamera-Modul e-CAM50_CU5642_MOD für Anwendungen, bei denen eine Vielzahl von Wechselobjektiven von den Benutzern benötigt werden ausgerichtet.
 
 
 
     
 
 
 
e-CAM50_CU5642_MOD - Individuelle Objektiv-Kamera-Modul
 
e-CAM50_CU5642_MOD ist eine kleine Form-Factor Pluggable-Kamera-Modul von e-con-Systeme für Anwendungen, bei denen eine Vielzahl von Wechselobjektiven verwendet wie von den Kunden benötigt werden ausgerichtet.
 
 
 
     
USB 3.0 KameraPlatine  
     
 
 
 
USB color Global Shutter Camera for applications requiring High Frame Rate
 
Introducing See3CAM_24CUG, a Full HD global shutter color USB 3.1 Gen 1 camera based on 1/2.6" AR0234 CMOS image sensor from ON Semiconductor® that can capture images at a high frame rate up to 120fps which helps to reduce motion blur while capturing fast-moving objects. This also produces much smoother images, with greater details of the scene. Know More...
 
 
 
     
 
 
 
Getting started with See3CAM_24CUG
 
See3CAM_24CUG, is a Full HD color global shutter USB 3.1 Gen 1 camera for accurate and fast capture of moving scenes at 120 fps in full resolution. This Global shutter USB camera features AR0234CS CMOS Image Sensor with pixel size of 3.0 x 3.0 µm and a dedicated high-performance Image Signal Processor (ISP), that performs all the Auto functions (Auto White Balance, Auto Exposure control). Know More...
 
 
 
     
 
 
 
See3CAM_20CUG make your Driver Monitoring System safer and smarter
 
Introducing See3CAM_20CUG - 2MP global shutter monochrome USB 3.1 Gen1 Camera for Driver Monitoring System (DMS). This industrial global shutter USB camera is based on High Resolution 1/2.9" OmniVision's OV2311 Image global shutter sensor with 3μm x 3μm pixel OmniPixel® 3-GS technology. This monochrome USB camera can capture high frame rate images without any motion blur and its IR sensitivity helps to produce stunning image quality even at the Near Infrared (NIR) regions. Know More...
 
 
 
     
 
 
 
Getting Started with See3CAM_20CUG - 2MP USB Monochrome Global Shutter Camera
 
See3CAM_20CUG is a 2MP global shutter monochrome USB 3.1 Gen1 Camera. This industrial global shutter USB camera is based on High Resolution 1/2.9" OmniVision's OV2311 Image global shutter sensor with 3μm x 3μm pixel OmniPixel® 3-GS technology. This monochrome USB camera can capture high frame rate images without any motion blur and its IR sensitivity helps to produce stunning image quality even at the Near Infrared (NIR) regions. Know More...
 
 
 
     
 
 
 
Eye Tracking vision experience just got more reliable and robust
 
Introducing See3CAM_20CUG - 2MP global shutter monochrome USB 3.1 Gen1 Camera for Eye Tracking Applications. This industrial global shutter USB camera is based on High Resolution 1/2.9" OmniVision's OV2311 Image global shutter sensor with 3μm x 3μm pixel OmniPixel® 3-GS technology. This monochrome USB camera can capture high frame rate images without any motion blur and its IR sensitivity helps to produce stunning image quality even at the Near Infrared (NIR) regions. Know More...
 
 
 
     
 
 
 
Introducing See3CAM_20CUG 2MP USB Monochrome Global Shutter Camera
 
See3CAM_20CUG is a 2MP global shutter monochrome USB 3.1 Gen1 Camera. This industrial global shutter USB camera is based on High Resolution 1/2.9" OmniVision's OV2311 Image global shutter sensor with 3μm x 3μm pixel OmniPixel® 3-GS technology. This monochrome USB camera can capture high frame rate images without any motion blur and its IR sensitivity helps to produce stunning image quality even at the Near Infrared (NIR) regions. Know More...
 
 
 
     
 
 
 
See3CAM_CU22 - High Dynamic Range (HDR) USB Camera with LED Flicker Mitigation (LFM)
 
Introducing See3CAM_CU22, is a 2MP color USB 3.1 Gen1 SuperSpeed camera featuring High Dynamic Range (HDR) with LED Flicker Mitigation (LFM). It can produce exceptional image quality where the light to dark ratio in a scene is wide while simultaneously mitigating the LED flicker. It has an ablility to bring out best quality images even under low light or no light conditions. Know More...
 
 
 
     
 
 
 
See3CAM_CU22 - HDR USB Camera with LFM for Autonomous vehicles
 
See3CAM_CU22, is a 2MP color USB 3.1 Gen1 SuperSpeed camera featuring High Dynamic Range (HDR) with LED Flicker Mitigation (LFM). It can produce exceptional image quality where the light to dark ratio in a scene is wide while simultaneously mitigating the LED flicker. It has an ability to bring out best quality images even under low light or no light conditions. Know More...
 
 
 
     
 
 
 
See3CAM_CU20 - now with enclosure | High Dynamic Range (HDR) USB 3.1 Gen 1 camera
 
We are thrilled to inform you that the See3CAM_CU20, our 2 MP High Dynamic Range (HDR) USB 3.1 Gen 1 camera, now comes with a secure enclosure. You can seamlessly stream at a wide temperature range (-40°C to 85°C). The See3CAM_CU20 is based on the AR0230AT CMOS image sensor and a high-performance ISP from ON Semiconductor™, and is fully compliant with CE and FCC. Know More...
 
 
 
     
 
 
 
Getting started with See3CAM_CU22 - HDR Camera with LED Flicker Mitigation (LFM)
 
See3CAM_CU22, is a 2MP color USB 3.1 Gen1 SuperSpeed camera featuring High Dynamic Range (HDR) with LED Flicker Mitigation (LFM). This HDR camera is based on 1/2.5" CMOS image sensor and a dedicated high-performance Image Signal Processor (ISP). It has S-mount (M12) lens holder which allows customers to choose and use the lens according to their requirement. It is a Plug-and-Play camera (UVC compliant) for Windows and Linux. Know More...
 
 
 
     
 
 
 
Hyperyon® Vs iPhone 8+ / Google Pixel : Low Light Comparison
 
Watch the Low Light comparison video of Hyperyon® with Other Low Light Cameras in the Market. Hyperyon® is a 2MP Ultra Low-light USB Color Camera with High Dynamic Range (HDR) support and H.264/MJPEG compression. Hyperyon® is an ideal camera for customers looking for cameras for challenging outdoor lighting conditions or extremely low light conditions. Know More :Hyperyon® - 2MP SONY STARVIS IMX290 Ultra Low-light USB camera.
 
 
 
     
 
 
 
4K USB Camera with inbuilt frame buffer at IMAGE SENSING SHOW 2019 (ISS2019)
 
Welcome to "e-con Systems" booth. I am Morigami from their distributor "Silicon Device" in Japan. Today I am going to demonstrate one of their latest product FRAMESAFE CAMERA (formerly known as See3CAM_CU1317). As you can see, 10 cameras also known as buffer cameras connected to a computer using USB interface. The special feature about these cameras is that they can simultaneously transmit 10 images to the computer through an external trigger or command from a computer. Images taken at a speed of per millisecond are displayed on computer screen. For more info, visit : 4K USB Camera with inbuilt frame buffer.
 
 
 
     
 
 
 
Photogrammetry – Making 3D Models with 100 FRAMEsafe™ Cameras
 
Making 3D Models for Photogrammetry applications with 100 FRAMEsafe™ Cameras (FSCAM_CU135) - 13MP USB 3.0 Camera with inbuilt frame buffer. For more info, visit : 13 MP AR1335 Color Buffer Camera.
 
 
 
     
 
 
 
Synchronized multiple 4K USB 3.0 cameras on a single host | FSCAM_CU135
 
Watch the video of FSCAM_CU135 - synchronized multiple 4K USB 3.0 cameras on a single host without losing the frames from any camera. For more info, visit : 13MP Multi-frame buffer camera.
 
 
 
     
 
 
 
Getting started with FSCAM_CU135 - 4K USB 3.0 Camera with inbuilt frame buffer
 
Watch the video of Getting started with FSCAM_CU135 - 4K USB 3.0 Camera with inbuilt frame buffer. FSCAM_CU135 is a first frame buffer camera in the FRAMEsafe™ camera series. It is a 13 MP Fixed focus USB camera with advanced multi frame buffer for enhanced reliability. It has 2 Gb DDR3 SDRAM to store and retrieve the entire frame without losing data even at very high speeds. For more info, visit : 13MP Multi-frame buffer camera.
 
 
 
     
 
 
 
Introducing FRAMEsafe™ - AR1335 Camera with inbuilt frame buffer
 
FSCAM_CU135 is a first frame buffer camera in the FRAMEsafe™ camera series. It is a 13 MP Fixed focus USB camera with advanced multi frame buffer for enhanced reliability. It has 2 Gb DDR3 SDRAM to store and retrieve the entire frame without losing data even at very high speeds. For more information: 4K Multi-frame buffer camera.
 
 
 
     
 
 
 
Introducing See3CAM_CU55M - 1/2.5 inch 5MP Low Noise Monochrome USB camera
 
Introducing See3CAM_CU55M, a 5 MP Monochrome USB 3.1 Gen1 SuperSpeed Camera. This camera produces monochrome images of exceptional quality with a 1/2.5" AR0521 CMOS image sensor from ON Semiconductor®, backed by 2.2μm x 2.2μm pixel BSI technology. It offers 8bit and 12bit outputs and streaming 5MP at 30 fps. With its low noise and excellent image quality, this will be an ideal camera for applications such as Digital microscopy, Iris recognition, NIR imaging, etc. For more info, visit : 5 MP Monochrome USB 3.1 Gen1 SuperSpeed Camera.
 
 
 
     
 
 
 
Monochrome Camera for Digital Microscopy - See3CAM_CU55M
 
Watch the demo of Digital Microscopy using See3CAM_CU55M, a 5 MP Monochrome USB 3.1 Gen1 SuperSpeed Camera. This camera produces monochrome images of exceptional quality with a 1/2.5" AR0521 CMOS image sensor from ON Semiconductor®, backed by 2.2&mi;m x 2.2μm pixel BSI technology. It offers 8bit and 12bit outputs and streaming 5MP at 30 fps. With its low noise and excellent image quality, this will be an ideal camera for applications such as Digital microscopy, Iris recognition, NIR imaging, etc. For more info, visit: 5.0 MP AR0521 Monochrome USB Camera.
 
 
 
     
 
 
 
Monochrome Camera for IRIS Recognition See3CAM_CU55M
 
Watch the demo of IRIS Recognition using See3CAM_CU55M, a 5 MP Monochrome USB 3.1 Gen1 SuperSpeed Camera. This camera produces monochrome images of exceptional quality with a 1/2.5" AR0521 CMOS image sensor from ON Semiconductor®, backed by 2.2μm x 2.2μm pixel BSI technology. It offers 8bit and 12bit outputs and streaming 5MP at 30 fps. With its low noise and excellent image quality, this will be an ideal camera for applications such as Digital microscopy, Iris recognition, NIR imaging, etc. For more info, visit: 5.0 MP Monochrome USB3.1 Gen1 Camera.
 
 
 
     
 
 
 
Getting started with See3CAM_CU55M - 1/2.5 inch 5MP Low Noise Monochrome USB camera
 
Getting started with See3CAM_CU55M, a 5 MP Monochrome USB 3.1 Gen1 SuperSpeed Camera. This camera produces monochrome images of exceptional quality with a 1/2.5" AR0521 CMOS image sensor from ON Semiconductor®, backed by 2.2μm x 2.2μm pixel BSI technology. It offers 8bit and 12bit outputs and streaming 5MP at 30 fps. With its low noise and excellent image quality, this will be an ideal camera for applications such as Digital microscopy, Iris recognition, NIR imaging, etc. For more info, visit - 5MP Monochrome USB Camera.
 
 
 
     
 
 
 
Gettings started with Conversa® - 3.4MP USB camera with built-in Stereo Microphone | e-con Systems
 
Watch the getting started video of Conversa®. Conversa®, a 3.4MP USB camera with built-in stereo microphone for crystal clear sound. This full HD low light camera is based on e-con Systems' most popular low light USB camera, See3CAM_CU30. For more information: Low Light USB 3.1 Gen 1 Camera with Microphone.
 
 
 
     
 
 
 
Conversa® - 3.4MP USB camera with built-in Stereo Microphone | e-con Systems
 
Watch the getting started video of Conversa®. Conversa®, a 3.4MP USB camera with built-in stereo microphone for crystal clear sound. This full HD low light camera is based on e-con Systems' most popular low light USB camera, See3CAM_CU30. For more information: Low Light USB 3.1 Gen 1 Camera with Microphone.
 
 
 
     
 
 
 
Getting Started with Hyperyon® - H.264 Ultra low-light HDR camera | e-con Systems
 
Watch the getting started video of Hyperyon® - the most awaited H.264 Ultra low-light HDR camera. Hyperyon® has outstanding low-light performance and low noise, 3D noise filtering and HDR with Socionext Image Signal Processor (ISP). It streams Full HD at 30 fps and 60fps over USB. For more information: imx290-low-light-usb-kamera-de.asp.
 
 
 
     
 
 
 
Low Light Comparison : Hyperyon® vs Other Camera | e-con Systems
 
Watch the Low Light comparison video of Hyperyon® with Other cameras. Hyperyon® is an ideal camera for customers looking for cameras for challenging outdoor lighting conditions or extremely low light conditions. For more information: imx290-low-light-usb-kamera-de.asp.
 
 
 
     
 
 
 
Noise Reduction in Absolute Darkness with Hyperyon® | e-con Systems
 
Watch the Noise Reduction in 0.01lux with Hyperyon® - 2MP SONY IMX290 Ultra Low-light USB camera. Hyperyon® has outstanding low-light performance and low noise, 3D noise filtering and HDR with Socionext Image Signal Processor (ISP). It streams Full HD at 30 fps and 60fps over USB. For more information: imx290-low-light-usb-kamera-de.asp.
 
 
 
     
 
 
 
HDR Comparison : Hyperyon® vs Other HDR Cameras | e-con Systems
 
Watch the HDR comparison video of Hyperyon® with Other HDR Cameras. Hyperyon® has excellent low light performance, can work in nearly no-light conditions and very good Wide Dynamic Range (WDR) using 3DOL which is ideal for challenging lighting environments in both indoor and outdoor. For more information: imx290-low-light-usb-kamera-de.asp.
 
 
 
     
 
 
 
See3CAM_CU30 vs See3CAM_CU55 : Low Noise Comparison (In various light conditions) | e-con Systems
 
See3CAM_CU55 - 5MP Low Noise Fixed focus USB 3.1 Gen1 UVC Color Camera based on AR0521 CMOS Sensor and ISP from OnSemi™ Features superior low light sensitivity; Streams Full HD@60fps. It can capture good quality images even in lowlight conditions with lesser noise because of higher Signal to Noise Ratio (SNR). For more information: 5MP Low Noise Fixed focus USB 3.1 Gen1 Camera
 
 
 
     
 
 
 
Getting Started with See3CAM_CU55 - 1/2.5" 5.0 MP Low Noise USB Camera (Color) | e-con Systems
 
See3CAM_CU55 - 5MP Low Noise Fixed focus USB 3.1 Gen1 UVC Color Camera based on AR0521 CMOS Sensor and ISP from OnSemi™ Features superior low light sensitivity; Streams Full HD@60fps. It can capture good quality images even in lowlight conditions with lesser noise because of higher Signal to Noise Ratio (SNR). For more information: 5MP Low Noise Fixed focus USB 3.1 Gen1 Camera
 
 
 
     
 
 
 
Glass to Glass Latency | USB Camera VS GMSL Camera | e-con Systems
 
Comparison of Glass to Glass Latency between USB Camera (See3CAM_CU30) and GMSL Camera (NileCAM30_USB). For more information: gmsl-Kamera-de.asp
 
 
 
     
 
 
 
Getting Started with GMSL Camera over USB 3.1 GEN 1 Interface | e-con Systems
 
Getting Started with GMSL Camera (NileCAM30_USB) over USB 3.1 GEN 1 Interface. NileCAM30_USB is a four board solution containing the camera module, Serializer, Deserializer and USB base board. Read More : gmsl-Kamera-de.asp
 
 
 
     
 
 
 
DEMO : USB 3.1 GEN 1 Box Camera with Low Light capabilities | See3CAM_CU30_CHL_TC_BX | e-con Systems
 
See3CAM_CU30_CHL_TC_BX is a 3.4 MP, Color, UVC compliant, USB 3.1 GEN 1 box camera with low light capabilities. ar0330-Restlicht-USB-Kamerakarte-de.asp
 
 
 
     
 
 
 
Getting started with Xilinx USP ZCU104 and See3CAM_CU30_CHL_TC_BX | e-con Systems
 
Getting started with Xilinx Zynq UltraScale + MPSoC ZCU104 and See3CAM_CU30_CHL_TC_BX. ar0330-Restlicht-USB-Kamerakarte-de.asp
 
 
 
     
 
 
 
Coin Recognition Demo @ AIA Vision Show, Boston 2018 | e-con Systems
 
Demo of Coin Sorting using 1.0 MP Global Shutter Camera.
 
 
 
     
 
 
 
3.4 MP GMSL camera Demo @ ESC 2017 | e-con Systems
 
NileCAM is a 3.4 MP GMSL Camera based on AR0330 CMOS image sensor from ON Semiconductor®, with USB3 interface and it can support up to 15 meters through coax cable. /gmsl-Kamera-de.asp
 
 
 
     
 
 
 
DEMO: TANIA - Cypress® CX3™ Socionext ISP RDK with Dual Sony Sensors | e-con Systems
 
TANIA is a USB3.1 Gen1 UVC Reference Design Kit developed using Cypress CX3™ and Socionext ISP with Dual Sony Sensors. cypress-cx3-rdk-with-sony-imx230-imx258-de.asp
 
 
 
     
 
 
 
3.4 MP Low Light Autofocus USB camera with Liquid Lens - See3CAM_30
 
Demo of See3CAM_30 based on AR0330 sensor from ON Semiconductor. Varioptic Liquid Lens Autofocus Camera. Superior low-light performance - pixel size of 2.2μm. Streams 1080p@60fps & 3MP@60fps. For more information visit: https://www.e-consystems.com/ar0330-liquid-lens-USB-KameraPlatine-de.asp
 
 
 
     
 
 
 
Demo: See3CAM_81 - 8MP Autofocus USB Camera
 
See3CAM_81 is a 8MP Autofocus USB camera based on OV8865 CMOS sensor from OmniVision. For more information visit: https://www.e-consystems.com/8MP-AF-UVC-USB-kamera-de.asp
 
 
 
     
 
 
 
DEMO: See3CAM CU135 - 4K USB Camera (OEM)
 
See3CAM_CU135 is a 13MP fixed focus 4K USB camera board with good low light performance and iHDR support. For more information visit: https://www.e-consystems.com/4k-usb-Kamera-de.asp
 
 
 
     
 
 
 
Getting Started with See3CAM_CU20 2MP HDR USB3 Camera
 
See3CAM_CU20 is a 2MP wide temperature range HDR USB camera board with Lowlight performance. For more information visit: https://www.e-consystems.com/wide-temperature-range-hdr-usb-cameraboard-de.asp
 
 
 
     
 
 
 
See3CAM_CU20 Low Light Demo: 2MP USB3 Camera
 
See3CAM_CU20 is a 2.0 MP Low-light USB camera board with ultra-Low Light Sensitivity. For more information visit: https://www.e-consystems.com/wide-temperature-range-hdr-usb-cameraboard-de.asp
 
 
 
     
 
 
 
See3CAM_CU20 Demo: High Dynamic Range (HDR) USB camera
 
See3CAM_CU20 is a 2.0 MP High Dynamic Range (HDR) USB camera board with the ability to stream seamlessly at wide temperature range (-40°C to 85°C). For more information visit: https://www.e-consystems.com/wide-temperature-range-hdr-usb-cameraboard-de.asp
 
 
 
     
 
 
 
Getting Started with See3CAM_130 - 13MP USB Autofocus Camera
 
USB Autofocus Camera - See3CAM_130 is an UVC-Compliant AR1335 sensor based 13MP auto focus USB camera. For more information visit: https://www.e-consystems.com/13mp-autofocus-usb-kamera-de.asp
 
 
 
     
 
 
 
13MP Autofocus USB Camera Low Light Performance - See3CAM_130
 
See3CAM_130, a 4k 60fps camera supports iHDR and is backward compatibility with USB 2.0 hosts. For more information visit: https://www.e-consystems.com/13mp-autofocus-usb-kamera-de.asp
 
 
 
     
 
 
 
iHDR (i-High Dynamic Range) demo with 13MP Autofocus USB Camera - See3CAM_130
 
See3CAM_130 based on AR1335 image sensor is a 13mp autofocus USB camera that supports iHDR (i-High Dynamic Range). For more information visit: https://www.e-consystems.com/13mp-autofocus-usb-kamera-de.asp
 
 
 
     
 
 
 
Launching 13MP Autofocus USB 3.O camera with iHDR
 
See3CAM_130 - 13MP Autofocus USB camera based on AR1335 image sensor with UVC complaint. This 4K 60fps camera supports iHDR & performs all autofocus camera functionalities. https://www.e-consystems.com/13mp-autofocus-usb-kamera-de.asp
 
 
 
     
 
 
 
External hardware Trigger demo with See3CAM_130
 
13MP autofocus camera captures images with low light & have a dedicated, high performance ISP chip to perform all auto functions. See3CAM_130 streams 13MP @ 20fps in both uncompressed and compressed MJPEG formats. For more information visit: https://www.e-consystems.com/13mp-autofocus-usb-kamera-de.asp
 
 
 
     
 
 
 
Demo: 3.4 MP Low Light USB Camera Board (Color) - See3CAM_CU30
 
Low light camera module See3CAM_CU30 is based on AR0330 image sensor. This low light USB camera Streams uncompressed UYVY 1080p@60fps and 3MP@30fps. https://www.e-consystems.com/ar0330-Restlicht-USB-Kamerakarte-de.asp
 
 
 
     
 
 
 
See3CAM_11CUG - 1,3 MP USB 3.0-Kamera (Vollfarbe)
 
Das See3CAM_11CUG ist ein kundenspezifisches Objektiv mit 1,3 Megapixel USB 3.0 color Kamerasystem basierend auf dem Aptina / ON Semiconductor AR0134 CMOS Bildsensor. Dieses See3CAM_11CUG ist eine UVC-konforme USB 3.0 SuperSpeed-Kamera, die für USB 2.0-Anschlüsse rückwärtskompatibel ist; spezielle Kameratreiber werden nicht benötigt.
 
 
 
     
 
 
 
Synchronized Bilderfassung mit drei See3CAM_10CUGs
 
Die See3CAM_10CUG ist Global Shutter Kamera eine 1,3-Megapixel-USB-3.0-Kamera mit globalem Verschluss und handelsüblichem Objektiv auf Basis des Aptina / ON Semiconductor AR0134 CMOS-Bildsensors. Die See3CAM_10CUG ist eine UVC-konforme SuperSpeed USB 3.0-Kamera, die für USB 2.0-Anschlüsse rückwärtskompatibel ist; spezielle Kameratreiber werden nicht benötigt
 
 
 
     
 
 
 
See3CAM_10CUG - 1,3 MP USB 3.0-Kamera mit globalem Verschluss
 
Die See3CAM_10CUG ist Global Shutter Kamera eine 1,3-Megapixel-USB-3.0-Kamera mit globalem Verschluss und handelsüblichem Objektiv auf Basis des Aptina / ON Semiconductor AR0134 CMOS-Bildsensors. Die See3CAM_10CUG ist eine UVC-konforme SuperSpeed USB 3.0-Kamera, die für USB 2.0-Anschlüsse rückwärtskompatibel ist; spezielle Kameratreiber werden nicht benötigt.
 
 
 
     
 
 
 
Erfassung des Datenmatrix-Barcodes eines Schnellläuferventilators mit der Global Shutter Kamera
 
Die See3CAM_10CUG ist Global Shutter Kamera eine 1,3-Megapixel-USB-3.0-Kamera mit globalem Verschluss und handelsüblichem Objektiv auf Basis des Aptina / ON Semiconductor AR0134 CMOS-Bildsensors. Die See3CAM_10CUG ist eine UVC-konforme SuperSpeed USB 3.0-Kamera, die für USB 2.0-Anschlüsse rückwärtskompatibel ist; spezielle Kameratreiber werden nicht benötigt.
 
 
 
     
 
 
 
Demo of Eye Tracking using See3CAM 12CUNIR - Monochrome Near IR camera
 
The See3CAM_12CUNIR is an electronic rolling shutter, 1.3 Megapixel Monochrome Camera that is based on the Aptina / ON Semiconductor AR0130CS CMOS image sensor. The low light sensitivity and the excellent NIR efficiency makes the See3CAM_12CUNIR camera as an ideal solution for Day/Night Vision Surveillance applications and NIR Imaging in medical and biological applications. //www.e-consystems.com/1MP-USB3-Near-IR-Kamera-de.asp
 
 
 
     
 
 
 
Getting Started with See3CAM_80 - 8MP Autofocus UVC USB 3.0 Camera
 
See3CAM_80 is a high performance 8.0 Mega Pixel auto focus USB 3.0 camera module based on OV8825 CMOS Image sensor. This High Definition OEM USB 3.0 Camera Board is fully Compliant with USB Video Class (UVC) Standard. See3CAM_80 enables 8MP still image capturing along with the 720p and 1080p video streaming capability.
 
 
 
     
 
 
 
Streaming 5 See3CAM_80s connected USB 3.0 Host via USB3 hub
 
The video demonstrates the streaming of 5 See3CAM_80s connected USB 3.0 Host via USB3 hub. The videos are streamed, 640x480 @30fps by each camera. Refer our blog at //www.e-consystems.com/blog/camera/?p=1175, for the Practical Test Cases performed with On board USB 3.0 controller from the host.
 
 
 
     
 
 
 
USB 3.0 camera with Barcode Scanner SDK
 
Spica is a 1D and 2D Barcode scanning application compatible with any Direct Show camera driver. This Barcode scanner application supports Windows 8, Windows 7, Windows Embedded Compact and Windows Embedded Handheld. //www.e-consystems.com/Barcode-Scanner-SDK.asp
 
 
 
     
 
 
 
e-con's USB 3.0 camera streaming 720p@30fps on ODROID-XU
 
The video demonstrates 720p @ 30fps video streaming with the See3CAM family of cameras connected to USB 3.0 port of Samsung Exynos-5 Octa based ODROID-XU platform. The See3CAM family of USB 3.0 cameras are UVC Compliant and don't need any special drivers to be installed on the PC or the host side. //www.e-consystems.com/See3CAM-USB-3-Camera.asp
 
 
 
     
 
 
 
See3CAMCU50 - 5 MP CMOS USB 3.0 Camera with M12 lens holder
 
See3CAMCU50 is a high performance 5MP, UVC Compliant, CMOS USB 3.0 camera based on OV5640 CMOS Image sensor with the S-mount (M12) lens holder. //www.e-consystems.com/M12-CMOS-USB-3-Camera.asp
 
 
 
     
 
 
 
Optische Zoom Demo: See3CAM_30Z10x - USB 3,0 10-fach optische Zoom-Kamera
 
Die See3CAM_30Z10X ist eine 3 Megapixel Autofokus Zoom-Kamera mit USB 3,0-Schnittstelle, basierend auf 1/3-Zoll-Rollverschluss mit CMOS Farb-Bildsensor. In der Kamera ist ein voll funktionsfähiger Signalprozessor verbaut und sie unterstützt das YUV422-Bildausgabeformat.
 
 
 
     
USB 2.0 KameraPlatine  
     
 
 
 
Demo von 5MP USB-KameraModul, Streaming-HD (720p) Video @ 30fps
 
e-CAM51_USB ist ein 5,0-Megapixel UVC- und UAC-Autofokus USB HD-kameramodul auf Basis des OV5640 CMOS-Bildsensors von OmniVision Inc. Ausgestattet mit Built-in Mikrofon mit 16-Bit-PCM-Unterstützung und 4 Allzweck-Pins.
 
 
 
     
 
 
 
5,0-Megapixel Autofokus-HD-USB-Kameramodul Features
 
e-CAM51_USB ist ein 5,0-Megapixel UVC- und UAC-Autofokus USB HD-kameramodul auf Basis des OV5640 CMOS-Bildsensors von OmniVision Inc. Die High-Definition-USB-Kamerakarte ist vollständig kompatibel mit den Standards USB Video Class (UVC) 1.0 und USB Audio Class 1.0.
 
 
 
     
 
 
 
e-CAM33_USB GUVC Viewer Controls
 
e-CAM33_USB Kamera GUVC Viewer-Anwendung Nutzung Demo.
 
 
 
     
 
 
 
USB-Kamera demonstrieren GPIO-Funktion und mehr
 
Dieses Video auf USB-Kamera Platine demonstriert die Funktionen der 3 General Purpose Input-Pin und 1 Allzweck-Ausgangs-Pin durch UVC Erweiterung Kontrolle.
 
 
 
     
 
 
 
USB-Kamera demonstrieren Auto-Focus-Funktion und mehr
 
e-CAM33_USB ist ein steckbares 3,2-Megapixel UAC-Autofokus USB-Hochleistungskameramodul mit befestigtem Objektivhalter und OV3640-Bildsensor von OmniVision. Dieses USB-Kameramodul mit eingebautem Mikrofon und integriertem ADC bietet dem Benutzer hochwertige Audio-Sampling-Funktionen. Bei einer Abtastrate von 48 KHz wird die 16-Bit-Impuls-Codemodulierung unterstützt.
 
 
 
     
     
Stereo-Vision Kamera  
     
 
 
 
Demo : STEEReoCAM® - 3D MIPI Stereo Camera for NVIDIA® Jetson Xavier™/TX2 at ISS2019
 
Welcome to "e-con Systems" booth. I am Morigami from their distributor "Silicon Device" in Japan. Today, I will demonstrate their latest product STEEReoCAM®. As you see STEEReoCAM® has 2-Sensors. With this, it is possible to know the distance of the object in real time. Here are 2- global shutter Sensors. These use MIPI interface and are connected to NVIDIA® Jetson AGX Xavier™ Developer Kit . As you see with the processing, one can see the distance between my hand and camera in real time, in color. With this camera object can be seen at a distance from 95-cm to 8m.
 
Watch the demo of STEEReoCAM® - 3D MIPI Stereo Camera for NVIDIA® Jetson Xavier™/TX2 at IMAGE SENSING SHOW 2019 (ISS2019). For more info, visit - 2MP Stereo Camera for NVIDIA® Jetson AGX Xavier™/TX2
 
 
 
     
 
 
 
Getting started with Stereo Camera forh NVIDIA® Jetson NANO™
 
We are proud to announce that STEEReoCAM®, our hugely popular 2MP global shutter MIPI Stereo camera is now available to evaluate with NVIDIA® Jetson Nano™ developer kit. STEEReoCAM® is already known for its accuracy and depth range among our customers using NVIDIA® Jetson AGX Xavier™/TX2 platforms.
 
For more info, visit - 2MP Stereo Camera for NVIDIA® Jetson NANO™
 
 
 
     
 
 
 
Depth Mapping demo of STEEReoCAM® with NVIDIA Jetson AGX Xavier/TX2 | e-con Systems
 
STEEReoCAM® - a 2MP global shutter MIPI Stereo camera with improved accuracy and increased depth range for NVIDIA® Jetson AGX Xavier™ / Jetson™ TX2 Developer Kit. STEEReoCAM® will be provided with an exclusive NVIDIA® CUDA® accelerated SDK that runs on the NVIDIA GPU.
 
Watch the non-moving object Depth Mapping demo of STEEReoCAM®. Know More - 2MP Stereo Camera for NVIDIA Jetson AGX Xavier/TX2
 
 
 
     
 
 
 
Point Cloud demo with STEEReoCAM® - 2MP 3D MIPI Stereo Camera for NVIDIA Jetson AGX Xavier/TX2
 
STEEReoCAM® - a 2MP global shutter MIPI Stereo camera with improved accuracy and increased depth range for NVIDIA® Jetson AGX Xavier™ / Jetson™ TX2 Developer Kit. STEEReoCAM® will be provided with an exclusive NVIDIA® CUDA® accelerated SDK that runs on the NVIDIA GPU.
 
Watch the Point Cloud demo with STEEReoCAM®. Know More - 2MP Stereo Camera for NVIDIA Jetson AGX Xavier/TX2
 
 
 
     
 
 
 
Depth Sensing demo of STEEReoCAM® with NVIDIA Jetson AGX Xavier/TX2 | e-con Systems
 
STEEReoCAM® - a 2MP global shutter MIPI Stereo camera with improved accuracy and increased depth range for NVIDIA® Jetson AGX Xavier™ / Jetson™ TX2 Developer Kit. STEEReoCAM® will be provided with an exclusive NVIDIA® CUDA® accelerated SDK that runs on the NVIDIA GPU.
 
Watch the moving object Depth Sensing demo of STEEReoCAM®. Know More - 2MP Stereo Camera for NVIDIA Jetson AGX Xavier/TX2
 
 
 
     
 
 
 
Getting Started with STEEReoCAM® - 2MP 3D MIPI Stereo Camera for NVIDIA Jetson AGX Xavier/TX2
 
STEEReoCAM® - a 2MP global shutter MIPI Stereo camera with improved accuracy and increased depth range for NVIDIA® Jetson AGX Xavier™ / Jetson™ TX2 Developer Kit. STEEReoCAM® will be provided with an exclusive NVIDIA® CUDA® accelerated SDK that runs on the NVIDIA GPU.
 
Watch the Getting Started with STEEReoCAM®. Know More - 2MP Stereo Camera for NVIDIA Jetson AGX Xavier/TX2