Video Channel

Home >> Video

e-con's Video Channel

Camera Boards
Camera Modules
USB Cameras
Stereo Vision Camera
eSOM & Reference designs
Others

MIPI Camera Boards

Low-light comparison of e-CAM21_CUTX2 vs Normal Camera at both Indoor and Outdoor

low-light comparison of the e-CAM21_CUTX2 is demonstrated in this video. Read More information at https://www.e-consystems.com/jp/jetson-tx2-ultra-low-light-camera-board-jp.asp

Getting Started with e CAM21_CUTX2: Sony IMX290 camera for NVIDIA Jetson TX2

2MP ultra-low light Sony STARVIS IMX290 based MIPI camera for NVIDIA Jetson TX2. Read More information at https://www.e-consystems.com/jp/jetson-tx2-ultra-low-light-camera-board-jp.asp

Getting Started with e-CAM80_IMX7 - 8MP Autofocus MIPI Camera for i.MX7

e-CAM80_IMX7 is a 8MP Autofocus MIPI camera board for NXP® i.MX7 SABRE Development kit. Read More information at https://www.e-consystems.com/jp/imx7-mipi-camera-board-jp.asp

Demo: 2MP Sony IMX290 Ultralow Light Camera for Jetson TX2 @ ESC 2017

2MP ultra low light 4-lane MIPI CSI-2 camera board for NVIDIA® Jetson TX2/TX1 developer kit. Read More information at https://www.e-consystems.com/jp/jetson-tx2-ultra-low-light-camera-board-jp.asp

3.4 MP GMSL camera Demo @ ESC 2017

NileCAM is a 3.4 MP GMSL Camera based on AR0330 CMOS image sensor from ON Semiconductor®, with USB3 interface and it can support up to 15 meters through coax cable. Read More information at https://www.e-consystems.com/jp/gmsl-camera-jp.asp

13MP NVIDIA Jetson TX2 Camera - e-CAM131_CUTX2

e-CAM131_CUTX2 is a 13MP 4-lane MIPI CSI-2 fixed focus camera board for NVIDIA® Jetson TX2/TX1 developer kit. Read More information at https://www.e-consystems.com/jp/13mp-nvidia-jetson-tx2-camera-board-jp.asp

Demo: e-CAM30_HEXCUTX2 - Six 3.4 MP Camera for NVIDIA Jetson TX1/TX2

e-CAM30_HEXCUTX2 is a multiple camera solution for NVIDIA® Jetson TX1/TX2 developer kit. Read More information at https://www.e-consystems.com/jp/multiple-csi-cameras-for-nvidia-jetson-tx2-jp.asp

3.4 MP Liquid Lens Autofocus Jetson TX2 Camera

e-CAM31_TX2 is a 3.4 MP 4-lane MIPI CSI-2 liquid lens Auto focus camera board for NVIDIA® Jetson TX2 developer kit. Read More information at https://www.e-consystems.com/jp/autofocus-liquid-lens-nvidia-jetson-tx2-camera-jp.asp

Webinar Recording: e-con cameras for NVIDIA Jetson TX1/TX2

Webinar Recording: e-con cameras for NVIDIA Jetson TX1/TX2. Read More information at https://www.youtube.com/watch?v=YVHQg7pzSxM

Live Demo : Multiple Camera solution for Nvidia Jetson TX1/TX2 at ESC Boston 2017

Live Demo : Multiple Camera solution for Nvidia Jetson TX1/TX2 at ESC Boston 2017. Read More information at https://www.youtube.com/watch?v=30Qf8zw2qjQ

3.4 MP MIPI Camera for NVIDIA Jetson TX1

3.4 MP 4 lane MIPI CSI-2 custom lens camera board for NVIDIA® Jetson Tegra X1 Development Kit. Read More information at https://www.e-consystems.com/jp/3MP-Jetson-TX1-Camera-board.asp

13MP MIPI camera for NVIDIA Jetson TX1

13MP MIPI camera based on AR1820HS camera module streaming on Jetson TX1 Kit. Read More information at 13mp-nvidia-jetson-tx1-camera-board-jp.asp

6 MIPI CSI-2 Cameras support for NVIDIA Jetson TX1

Each 3.4MP AR0330 camera module, streams uncompressed video 1080p at 30fps. https://www.e-consystems.com/blog/camera/6-mipi-csi-2-cameras-support-for-jetson-tx1/

13MP MIPI camera board for NVIDIA Jetson TX1

e-CAM130_CUTX1 - 13MP MIPI camera daughter board for the NVIDIA Jetson TX1 development kit. 13mp-nvidia-jetson-tx1-camera-board-jp.asp

13MP MIPI Camera Board for NVIDIA Tegra K1 based Jetson DevKit

e-CAM130_CUTK1 is a 13.0 Mega Pixel, 4-lane MIPI CSI-2 Camera solution for NVIDIA Tegra K1 CPU. The e-CAM130_CUTK1 has 13MP camera module and an adapter board to connect the camera with the Jetson TK1 development kit. The Jetson TK1 development kit is an full-fledged platform for Tegra K1 embedded applications. The e-CAM130_CUTK1 camera is interfaced to the Jetson development kit through 4-lane MIPI CSI-2 interface.

8 Mega Pixel Auto Focus MIPI Camera Module

The e-CAM80_MI8825_MOD is a 8 MP HD MIPI camera Module from e-con systems featuring Omnivision OV8825 image sensor. Any processor system like I.MX6, OMAP4430, OMAP4460 that has a MIPI CSI-2 can directly interface the e-CAM80_MI8825_MOD.

e-CAM51IMX6 - 5MP MIPI Wandboard Camera

The e-CAM51IMX6 is an i.MX6 camera daughter board (MIPI) designed by e-con systems for the WandBoard - NXP®/Freescale® iMx6 Development Board. e-CAM51IMX6 uses a 5 Mega Pixel auto focus camera module powered by OmniVision's OV5640 CMOS image sensor and is interfaced to i.MX6 CPU through MIPI CSI-2 Interface.

Video Streaming Over SoftAP from WandBoard with e-CAM51IMX6

The video demonstrates the Streaming Video over SoftAP from WandBoard with e-CAM51IMX6 - 5MP i.MX6 camera. Targeted for application such Retail Analytics, Surveillance etc

Getting started with 5MP MIPI Camera board for NXP®/Freescale i.MX6 Processors

The e-CAM50IMX6 is an i.MX6 camera daughter board (MIPI) designed by e-con systems for the NXP®/Freescale® SABRE Lite Development kit. e-CAM50IMX6 uses a 5 Mega Pixel auto focus camera module powered by OmniVision's OV5640 CMOS image sensor and this iMX6 camera board is configured to provide MIPI-CSI-2 interface only.

Getting started with e-CAM51_44x - 5 MP MIPI CSI-2 OEM Camera Board for TI's OMAP4

The e-CAM51_44x is a OMAP4 MIPI camera daughter board designed by e-con systems for the PandaBoard. e-CAM51_44x uses a 5M Pixel auto focus camera module powered by OmniVision's OV5640 CMOS image sensor and this OMAP4 camera board is configured to provide MIPI-CSI-2 interface only. Video enables to get started with the e-CAM51_44x.

5 MP MIPI CSI-2 OEM Camera Board for TI's OMAP4 | PandaBoard Camera

e-con Systems releases MIPI Camera Board, e-CAM51_44x for Texas Instruments' OMAP4 family of processors. e-CAM51_44x is interfaced on to PandaBoard that has the OMAP4430/OMAP4460 processor and includes e-CAM57_MI5640_MOD, a 5 MP autofocus MIPI CSI-2 camera module that is based on OmniVision's OV5640 sensor.

MIPI CSI-2 Camera Interface Reference Design for AM37x / DM37x / OMAP35x TI Processors

e-CAM55_37x is a World's first MIPI CSI-2 Camera Interface Reference Design for AM37x / DM37x / OMAP35x TI Processors Launched by e-con Systems

Windows Embedded Compact 2013 Camera Solutions

e-con Systems offers Camera solutions on Windows Embedded Compact 2013. Video shows a 5MP camera streaming on to the LCD of the TI DM3730 based EVM. econsystems offers various development solutions in windows CE

DaVinci Camera Boards

Camera Board for Texas Instruments DaVinci Processor

This Video about e-con's Camera Daughter Board e-CAM50_DM37x, a 5MP HD camera solution for TI's AM/DM37x EVM Board compatible with DaVinci's DM37x and Sitara's AM37x Processors.

OMAP Camera Boards

e-CAM32_OMAP_GSTIX Camera Board

e-CAM32_OMAP_GSTIX camera module has e-con Systems' 3.2 Megapixel camera which works plug and play with every Gumstix® Overo™ computer-on-module powered by OMAP Applications Processor and has 27 pin header to interface.

Demonstration of Video Recording on Gumstix Overo COM using e-CAM50_OMAP_GSTIX

The e-CAM50_OMAP_GSTIX expansion board is e-con Systems' 5.0 Megapixel camera board which works plug and play with every Gumstix® Overo™ computer-on-module (COM).

OMAP Camera Hardware Software EVM kit

e-CAM32_OMAP35x is e-con's 3.2 Mega Pixel camera solution for hugely successful OMAP35x processors from Texas Instruments. The e-CAM32_OMAP35x is a add on module that houses a 3.2 Megapixel camera with autofocus features along with circuitry for LED flash lighting. The e-CAM32_OMAP35x can be directly interfaced on the TI TMDSEVM3530 EVM board

e-CAM32_OMAP_GSTIX Camera Module

OV4682 RGB IR MIPI camera module | Multi Spectral High frame rate camera, Streams up to 330 FPS

See3CAM_CU40, the industry's first RGB-IR pixel format camera with a USB 3.0 UVC interface, and the e-CAM40_CUMI4682_MOD, a stand-alone MIPI CSI-2 module. Read more information at OV4682-RGB-IR-MIPI-CAMERA-Module-jp.asp

Reading Microprints on a Dollar Bill using e-con's e-CAM50_CU5642_MOD

a small form-factor pluggable camera module e-CAM50_CU5642_MOD targeted for applications where a wide variety of interchangeable lenses are needed by the users.

e-CAM50_CU5642_MOD - Custom Lens Camera Module

e-CAM50_CU5642_MOD is a small form-factor pluggable camera module from e-con Systems targeted for applications where a wide variety of interchangeable lenses can be used as needed by the customers.

USB 3.0 Camera Boards

3.4 MP Low Light Autofocus USB camera with Liquid Lens - See3CAM_30

Demo of See3CAM_30 based on AR0330 sensor from ON Semiconductor. Varioptic Liquid Lens Autofocus Camera. Superior low-light performance - pixel size of 2.2μm. Streams 1080p@60fps & 3MP@60fps. For more information visit: https://www.e-consystems.com/jp/ar0330-liquid-lens-usb-camera-board-jp.asp

Demo: See3CAM_81 - 8MP Autofocus USB Camera

See3CAM_81 is a 8MP Autofocus USB camera based on OV8865 CMOS sensor from OmniVision. For more information visit: https://www.e-consystems.com/jp/8MP-AF-UVC-USB-Camera-jp.asp

DEMO: See3CAM CU135 - 4K USB Camera (OEM)

See3CAM_CU135 is a 13MP fixed focus 4K USB camera board with good low light performance and iHDR support. For more information visit: https://www.e-consystems.com/jp/4k-usb-camera-jp.asp

Getting Started with See3CAM_CU20 2MP HDR USB3 Camera

See3CAM_CU20 is a 2MP wide temperature range HDR USB camera board with Lowlight performance. For more information visit: https://www.e-consystems.com/jp/wide-temperature-range-hdr-usb-cameraboard-jp.asp

See3CAM_CU20 Low Light Demo: 2MP USB3 Camera

See3CAM_CU20 is a 2.0 MP Low-light USB camera board with ultra-Low Light Sensitivity. For more information visit: https://www.e-consystems.com/jp/wide-temperature-range-hdr-usb-cameraboard-jp.asp

See3CAM_CU20 Demo: High Dynamic Range (HDR) USB camera

See3CAM_CU20 is a 2.0 MP High Dynamic Range (HDR) USB camera board with the ability to stream seamlessly at wide temperature range (-40°C to 85°C). For more information visit: https://www.e-consystems.com/jp/wide-temperature-range-hdr-usb-cameraboard-jp.asp

Getting Started with See3CAM_130 - 13MP USB Autofocus Camera

USB Autofocus Camera - See3CAM_130 is an UVC-compliant AR1335 sensor based 13MP auto focus USB camera. For more information visit: 13mp-autofocus-usb-camera-jp.asp

13MP Autofocus USB Camera Low Light Performance - See3CAM_130

See3CAM_130, a 4k 60fps camera supports iHDR and is backward compatibility with USB 2.0 hosts. For more information visit: /jp/13mp-autofocus-usb-camera-jp.asp

iHDR (i-High Dynamic Range) demo with 13MP Autofocus USB Camera - See3CAM_130

See3CAM_130 based on AR1335 image sensor is a 13mp autofocus USB camera that supports iHDR (i-High Dynamic Range). For more information visit: /jp/13mp-autofocus-usb-camera-jp.asp

Launching 13MP Autofocus USB 3.O camera with iHDR

See3CAM_130 - 13MP Autofocus USB camera based on AR1335 image sensor with UVC compliance. This 4K 60fps camera supports iHDR & performs all autofocus camera functionalities. 13mp-autofocus-usb-camera-jp.asp

External hardware Trigger demo with See3CAM_130

13MP autofocus camera captures images with low light & have a dedicated, high performance ISP chip to perform all auto functions. See3CAM_130 streams 13MP @ 20fps in both uncompressed and compressed MJPEG formats. For more information visit: 13mp-autofocus-usb-camera-jp.asp

Demo: 3.4 MP Low Light USB Camera Board (Color) - See3CAM_CU30

Low light camera module See3CAM_CU30 is based on AR0330 image sensor. This low light USB camera Streams uncompressed UYVY 1080p@60fps and 3MP@30fps. ar0330-lowlight-usb-cameraboard-jp.asp

Getting started with See3CAM_11CUG - 1.3 MP Full color USB 3.0 Industrial Camera

The See3CAM_11CUG is a 1.3 MP Color USB 3.0 industrial Camera. This See3CAM_11CUG is UVC-compliant SuperSpeed USB 3.0 Industrial Digital Camera and does not require any special camera drivers. The See3CAM_11CUG includes Image Signal Processor (ISP) which enables processed YUY2 video streaming and supports VGA@60FPS* and 720p@30fps (HD) when interfaced to a USB 3.0 host port.

Synchronized image capture using three See3CAMs

The Video demonstrates the Synchronized image capture with 3 See3CAM_10CUG, on an external trigger pulse. See3CAM_10CUG is an 1.3 MP global shutter USB 3.0 camera targeted for Multi-Camera Video Surveillance, Panorama View capture, Machine vision, Traffic surveillance, Object tracking, Industrial camera etc.

Getting Started with Color/Monochrome USB Camera

e-con Systems launches the See3CAM_10CUG, a global shutter, 1.3 MP Custom Lens Camera based on the Aptina / ON Semiconductor AR0134 CMOS image sensor. This See3CAM_10CUG is a UVC-compliant USB 3.0 SuperSpeed Camera and does not require any special camera drivers.

Capturing Data Matrix Barcode on a Fast running Fan using e-con Systems' See3CAM_10CUG

The See3CAM_10CUG is a global shutter, 1.3 Megapixel Camera that is based on the Aptina / ON Semiconductor AR0134 CMOS image sensor. This See3CAM_10CUG is a UVC-compliant USB 3.0 SuperSpeed Camera that is also backward compatible with USB2.0 host ports and does not require any special camera drivers.

Demo: Eye Tracking Using NIR Camera - See3CAM_12CUNIR

The See3CAM_12CUNIR is an electronic rolling shutter, 1.3 Megapixel Monochrome NIR Camera that is based on the Aptina / ON Semiconductor AR0130CS CMOS image sensor. The low light sensitivity and the excellent NIR efficiency makes the See3CAM_12CUNIR camera as an ideal solution for Day/Night Vision Surveillance applications and NIR Imaging in medical and biological applications.

Getting Started with See3CAM_80 - 8MP Autofocus UVC USB 3.0 Camera

See3CAM_80 is a high performance 8.0 Mega Pixel auto focus USB 3.0 camera module based on OV8825 CMOS Image sensor. This High Definition OEM USB 3.0 Camera Board is fully compliant with USB Video Class (UVC) Standard. See3CAM_80 enables 8MP still image capturing along with the 720p and 1080p video streaming capability.

Streaming 5 See3CAM_80s connected USB 3.0 Host via USB3 hub

The video demonstrates the streaming of 5 See3CAM_80s connected USB 3.0 Host via USB3 hub. The videos are streamed, 640x480 @30fps by each camera. Refer our blog at //www.e-consystems.com/blog/camera/?p=1175, for the Practical Test Cases performed with On board USB 3.0 controller from the host.

USB 3.0 camera with Barcode Scanner SDK

Spica is a 1D and 2D Barcode scanning application compatible with any Direct Show camera driver. This Barcode scanner application supports Windows 8, Windows 7, Windows Embedded Compact and Windows Embedded Handheld. //www.e-consystems.com/Barcode-Scanner-SDK.asp

e-con's USB 3.0 camera streaming 720p@30fps on ODROID-XU

The video demonstrates 720p @ 30fps video streaming with the See3CAM family of cameras connected to USB 3.0 port of Samsung Exynos-5 Octa based ODROID-XU platform. The See3CAM family of USB 3.0 cameras are UVC compliant and don't need any special drivers to be installed on the PC or the host side. See3CAM-USB-3-Camera-jp.asp

See3CAMCU50 - 5 MP CMOS USB 3.0 Camera with M12 lens holder

See3CAMCU50 is a high performance 5MP, UVC Compliant, CMOS USB 3.0 camera based on OV5640 CMOS Image sensor with the S-mount (M12) lens holder. M12-CMOS-USB-3-Camera-jp.asp

Optical zoom demo with See3CAM_30Z10x - USB 3.0 10X optical zoom camera

Video demonstrates Optical Zoom capability of See3cAM_30Z10x camera for PCB inspection. See3CAM_30Z10X is a 3 Mega Pixel Autofocus Optical Zoom Camera with USB 3.0 interface based on a 1/3" rolling shutter, color CMOS image sensor. This camera houses a full-functional Image Signal Processor and supports YUV422 output image format. The See3CAM_30Z10X camera supports 10X optical zoom and 6x Digital zoom.

USB 2.0 Camera Boards

Demo of 5MP USB Camera module, HD (720p) Video streaming @30fps

e-CAM51_USB is a high performance 5.0 Mega Pixel UVC and UAC auto focus USB HD camera module based on OV5640 CMOS Image sensor from OmniVision Inc. Featured with Built-in microphone with 16 bit PCM support and 4 General purpose pins.

5MP UVC UAC AutoFocus USB Camera Board - e-CAM51_USB - Features

A high performance e-CAM51_USB - 5.0 Mega Pixel UVC and UAC auto focus USB camera module and it is based on OV5640 CMOS Image sensor from OmniVision Inc. USB Camera Board is fully compliant with USB Video Class (UVC) 1.0 Standard, the USB Audio Class 1.0 Standard.

e-con Systems e-CAM33_USB GUVC Viewer Controls

e-CAM33_USB camera GUVC viewer application usage demo

USB Camera Demonstrating GPIO Feature and more

This video on USB Camera board demonstrated the functions of its 3 General purpose Input pin and 1 General purpose Output pin through UVC extension control.

USB Camera Demonstrating Auto-Focus Feature and more

e-CAM33_USB is a high performance 3.2 MP UAC Autofocus pluggable camera module with fixed lens holder and OV3640 CMOS Image sensor from Omnivision. This USB Camera has a built in microphone and an integrated ADC which can provide user with high quality audio sampling functions. 16 bit Pulse code modulation is supported with sample rate of 48 KHz.

Stereo Vision Camera

People height measurement with Tara - USB 3.0 stereo camera

People height measurement using Tara - stereo vision USB 3.0 camera in OpenCV3D-USB-stereo-camera-jp.asp

People distance measurement with Tara - Stereo camera

People's distance measurement with Tara - stereo vision USB 3.0 camera in OpenCV. 3D-USB-stereo-camera-jp.asp

Getting Started with Tara SDK + Depth measurement using Tara

Getting Started with Tara stereo vision camera SDK + Depth measurement using Tara in OpenCV library.3D-USB-stereo-camera-jp.asp

Box dimension measurement using Tara - Stereo Camera

Calculating box dimension with Tara - 3D stereo camera using depth measurement in OpenCV.3D-USB-stereo-camera-jp.asp

Point Cloud Demo with Tara - USB 3.0 Stereo vision camera

Tara is a UVC-Complaint 3D Stereo camera based on MT9V024 stereo sensor from ON Semiconductor which supports WVGA((2*752)x480) at 60fps over USB 3.0 in uncompressed format.3D-USB-stereo-camera-jp.asp

Stereo-Vision-Camera-Capella-GettingStarted

Capella is the world's first embedded pixel synchronous Stereo Vision Camera Reference Design for TI's OMAP35x and AM/DM37x processor on Gumstix® Overo® COMs, designed and developed by e-con Systems. In this Video, you can see how to get started with Capella. You can then proceed to develop your own Stereo vision algorithms and also integrate Stereo vision in your product design. Contact sales@e-consystems.com for more information.

Overview of Capella - Stereo Vision Camera Reference Design

Capella is the world's first embedded pixel synchronous Stereo Vision Reference Design for Texas Instruments' (TI) OMAP35x and AM/DM37x processor on Gumstix® Overo® COMs

Capella - Stereo Vision Camera Reference Design

e-con Systems new Capella - Stereo Vision Camera Reference Design connects to the Gumstix® Overo® COM's 27-pin camera FPC connector and delivers pixel-synchronous stereo frames to the OMAP™ processor. This camera is targeted for applications like Robotics, Auto-safety, Industrial Automation, Security & Surveillance and Interactive Entertainment.

DEMO: TANIA - Cypress® CX3™ Socionext ISP RDK with Dual Sony Sensors

TANIA is a USB3.1 Gen1 UVC Reference Design Kit developed using Cypress CX3™ and Socionext ISP with Dual Sony Sensors. https://www.e-consystems.com/jp/cypress-cx3-rdk-with-sony-imx230-imx258.asp

iMX7 System on Module based IoT gateway | eSOMiMX7 | Ampella | Embedded World'18 | e-con Systems

Watch the interesting facets of Smart farming with Ampella - iMX7 System on Module based IoT gateway. It has extensive connectivity options like LoRAWAN, 4G/3G Cellular etc along with support for different IoT protocols like MQTT, CoAP, MODBUS etc.,

Presenting 3D Camera System using Meissa (eSOMiMX6-micro RDK)

eSOMiMX6-micro now supports 3D video streaming & recording. Experience 3D in Virtual Reality. Applications : Stereo Dental Cameras, Obstacle Detection in Robotics, 3D Virtual tours, etc.www.e-consystems.com/jp/iMX6-micro-som-system-on-module-jp.asp

Build AWS IoT Gateway in 8 Hours with iMX6 SOM- Ankaa Kit

In Just 8 hours, build AWS based IoT gateway using eSOMiMX6 RDK Ankaa Kit. https://www.e-consystems.com/blog/system-on-module-SOM/build-aws-iot-gateway-2/

Build Azure IOT Gateway with Ankaa eSOMiMX6 RDK

For our Azure customers, e-con Systems has developed a prototype using our eSOMiMX6 RDK (Ankaa) to act as a IoT gateway device to collect and send data to the Azure IoT Hub. https://www.e-consystems.com/blog/system-on-module-SOM/connect-your-first-device-to-azure-iot/

eSOMiMX6-micro System on Module for Wearable | e-con Systems

With an ultra-small form factor of just 54mm x 20mm, eSOMiMX6-micro is the perfect System On Module for building your wearable device or any compact device. For more info, visit: https://www.e-consystems.com/jp/iMX6-micro-som-system-on-module-jp.asp .

eSOMiMX6 SOM runs Android Marshmallow 6.0.1 | e-con Systems

We are very glad to announce that eSOMiMX6 - iMX6 System on Module now supports Android Marshmallow 6.0.1. It's suitable for many applications across a number of domains ranging from Handheld, Robotics, Retail, Medical, etc. For More info, Visit: eSOMiMX6 - iMX6 System on Module .

Micro SOM on Wearables Live Demo at ESC Boston 2017

Here is the Live demo of iMX6 Micro SOM on Wearables at ESC Boston 2017. e-con Systems' eSOMiMX6-micro is a high performance micro system on module based on NXP/Freescale i.MX6 Quad/Dual Core ARM® Cortex®-A9 in an ultra small form factor of 54mm x 20mm with 10mA in suspend current. eSOMiMX6-micro

Introducing e-con's iMX6 Micro System on Module

Introducing e-con Systems' eSOMiXM6-micro: iMX6 Micro System on Module. eSOMiMX6-micro is a high performance system on module based on NXP/Freescale i.MX6 Quad/Dual Core ARM Cortex-A9 in a small form factor of 54mm x 20mm. iMX6-micro-som-system-on-module-jp.asp .

Getting Started With Meissa - I iMX6 Micro SOM RDK

Getting Started with iMX6 Micro Development Board, Meissa - I is a dual board solution that features eSOMiMX6-micro (iMX6 Micro SOM) & carrier board. Runs Linux / Android. meissa-I-imx6-micro-development-board-jp.asp .

Dual frame synced Full HD Video using eSOMTK1-Tegra K1 Board

Are you looking to build a Dual camera imaging system, watch this demo of eSOMTK1, Tegra K1 Board - Propus streaming Dual frame synced Full HD Video. Read More at https://www.e-consystems.com/blog/linux-android/?p=1037 .

eSOMTK1 now runs Android Lollipop (5.0.1) ! NVIDIA® Tegra® K1 System on Module

eSOMTK1 now runs Android Lollipop (5.0.1). eSOMTK1 is based on nVIDIA® Tegra® K1 CPU with the basic peripherals in a compact form factor. This is best suited for applications across a number of domains ranging from Automotive, Handheld, Robotics, Retail, Medical, etc. https://www.e-consystems.com/blog/linux-android/?p=927 .

Deep Learning Demo with eSOMTK1 in Retail Outlet | NVIDIA® Tegra® K1 SOM

Watch the demo of deep learning using eSOMTK1 - NVIDIA Tegra K1 SOM. https://www.e-consystems.com/blog/linux-android/?p=924 Deep learning is the set of algorithms to train the model data and based on trained data properties, we can recognize objects. Has lot of potential in autonomous driving systems - driverless cars. .

Tegra K1 board Propus - Dual 13MP camera streaming on Tegra K1 board

e-con Systems released Tegra K1 board Propus - nVidia Tegra K1 board with eSOMTK1 & carrier board. Tegra K1 board runs Linux/Android. For More: tegra-k1-development-board-jp.asp .

i.MX6 WEC2013 BSP Optimized - Cache issues resolved !!

e-con Systems released of optimized WEC2013 BSP(OS 1.05) for eSOMiMX6 Computer on module with the cache issues resolved. Freescale's default i.MX6 WEC2013 BSP has the cache issue that affects the Direct Show based video streaming and video playback. This optimized i.MX6 BSP enables smooth video streaming and Video Playback without Noise.

i.MX6 Reference design now captures Smiling faces

Demo of integrated face detection and Smile Detection with e-con Sytems' 13MP camera on eSOMiMX6 Running Android/Linux. The ACC-iMX6-CUMI1820CAM houses the e-CAM130_CUMI1820_MOD - 13 MP Camera module based on Aptina / ON Semiconductor AR1820HS sensor and interfaces with the Ankaa's i.MX6 processor over 4-lane MIPI CSI-2 interface.

Dual display for Android on i.MX6

e-con Systems announces Dual display solution on top of eSOMiMX6, i.MX6 based Computer on module. Customers who would need multiple displays would be benefited by this new solution. The i.MX6 processor has got support for multiple displays which e-con systems has harnessed and made it work in Android.

Android Kitkat Release for e-con i.MX6 system on module

eSOMiMX6 is an high performance System-On-Module based on Freescale i.MX6 Quad/Dual/Solo ARM™ Cortex-A9 based CPU with the basic peripherals in a compact form factor. The eSOMiMX6 has i.MX6 CPU running up to 1.2GHz - Quad Core, DDR3 SDRAM configurable up to 2GB and eMMC configurable up to 4GB. The eSOMiMX6 module also has the Wireless LAN and Bluetooth module.

Demo of Ankaa - i.MX6 Development Board running Linux

Ankka - i.MX6 Development Board is a dual board solution which features a piggy back eSOMiMX6 - Computer on module and carrier board. The computer on module is based on iMX6 processor -an ultra low microprocessor running upto 1.2GHz, 1GB DDR3 and 4GB eMMC flash. //www.e-consystems.com/iMX6-development-board.asp

Demo of Ankaa - i.MX6 Development Board running Android

Computer-on-Module running WEC2013 boots in less than A Second

Almach, a rapid development kit running on Windows Embedded Compact 2013 boots and rends the live camera preview in 823 millisecond. It includes e-con systems' custom Barcode libraries and is capable of decoding the 1D and 2D Barcode. Almach - WEC2013 development kit is based on eSOM3730, a AM3703 / DM3730 Computer on Module.

Windows Embedded Compact 2013 User interface / Shell Demo

The Almach - AM3703 / DM3730 Development Board is a dual board solution which features a piggy back eSOM3730 - computer on module and carrier board. The computer on module is based on AM3703 / DM3730 processor- an ultra low power microprocessor running up to 1GHz, mobile LPDDR SDRAM configurable from 128MB to 512MB and NAND flash configurable from 256MB to 512MB.

Windows embedded compact 2013 cloud (Azure) based application demo

With the Internet of things being future of the embedded world, e-con demonstrates WEC2013 cloud (Azure) based application on its eSOM3730 development kit.

Bluetooth support for Windows Embedded Compact 2013 custom shell

The video demonstrate the WEC2013 Bluetooth capabilities of with HID profile by connecting the Microsoft Widget touch mouse in e-con Systems' WEC2013 custom shell. For more information read our blog at //www.e-consystems.com/blog/windowsce/?p=1174 or visit our product page at DM3730-development-board.asp

Bluetooth file transfer in Windows Embedded Compact 2013 custom Shell

The video demonstrates file transfer using Bluetooth in e-con Systems' WEC2013 custom shell. For more information read our blog at //www.e-consystems.com/blog/windowsce/?p=1174 or visit our product page at DM3730-development-board.asp

UVC Camera support on Windows Embedded Compact 2013

e-con systems successfully integrated its UVC camera on Almach, an eSOM3730 based rapid development kit running on Windows embedded compact 2013 (WEC2013)

Reading 2D Barcodes using e-con's Regulus Platform

Reading 1D & 2D Barcodes through e-CAM 3MP Camera Board mounted on e-con's Regulus - PXA270 reference design.

PXA270 Platform - Active Sync and Debugging

PXA270 platform SIRIUS being used for Data Transfer using Active Sync and Application debugging

e-con Systems, eSOM270 - PXA270 Computer on module

eSOM270 is econ's PXA270 based computer on module that provides advanced peripheral integration, power savings, cheaper solution, reduced time to market. This video explains how eSOM270 is being plugged on to the baseboard using the SODIMM200 connector. visit www.e-consystems.com/esom270.asp for more details

Paypal Check Out Process | e-con Systems.com

This video explains the PayPal Check Out flow. Customers who intend to buy products from e-con Systems Online Store can either purchase using Credit Card or Direct Debit and those with PayPal account can checkout using PayPal to buy the products. Buy Our Products Online at webstore-jp.asp

QtCAM- Opensource UVC camera application for Linux - Demo

This video demonstrates e-con's opensource UVC camera application for Linux - Qtcam. For more information on Qtcam, please visit //www.e-consystems.com/opensource-linux-webcam-software-application.asp

Windows CE 6.0 boots in 3 sec and Streams Camera

Camera streaming on LCD something that you can see from this Fast-Boot Formatted Release demonstration. e-con Systems has expertise in widows embedded development, Porting solution, Windows CE BSP, device driver development and we also provide customized product development based on all windows ce versions.

Windows CE 6.0 and Windows Embedded Compact 7 Dual Boot on Alioth

Get the Dual boot Demo on Alioth to know which OS to use either Windows CE 6.0 or the Windows Embedded Compact 7 (WEC 7) as your choice.

Image Viewer for Windows Embedded CE - Installation Video

Watch this video and learn how to install eImageViewer application software on your Windows Embedded Compact devices.

Image Viewer for Windows Embedded CE - Demo

This Video is about eImageviewer application features while running on e-con's Regulus platform, a PXA270 based reference design with Windows Embedded CE 6.0 R3 ported on it.

Integration of 2G GSM Modem in Android

Android Development Kit demonstrating phone features on e-con's Alioth platform based on Intel's XScale PXA300 processor.

Making GPRS Connection Work on Android

Modifications to get the GPRS Data connection working on the Alioth platform, have a look at Data Connection enabled Alioth in this video.

USB 3.0 Camera demo at DesignWest, Silicon Valley

e-con Systems' President Mr. Ashok Babu demonstrated this newly launched USB 3.0 See3CAM Solutions at DESIGN West, San Jose, 2013. This barcode capture application was demonstrated on See3CAM connected to PC through USB 3.0 interface.