e-CAM10_CU0130_MOD - 1.3 MP Custom Lens NIR Camera Module (Monochrome)
The e-CAM10_CU0130_MOD is a 1.3 MP NIR Camera module (Monochrome) based on the Aptina / ON Semiconductor AR0130CS CMOS image sensor with S-mount lens holder attached to it. The AR0130 is a 1/3” Optical Form factor, Electronic Rolling Shutter CMOS sensor with enhanced sensitivity in the Near Infrared region and superior low light performance.
The e-CAM10_CU0130_MOD is designed to connect with any Application Processor that has parallel digital video interface. The standard S-Mount lens holder can accommodate a wide range of lenses based on the customer choice. e-CAM10_CU0130_MOD’s S-Mount holder can also house a fisheye lens or a zoom lens to meet their application requirements.
- Small form-factor pluggable camera module using 1.3 Mega pixel CMOS Image sensor
- M12P0.5 S-Mount Lens holder
- Flexibility to choose a lens as per application requirements
- size: 30mm x 30mm (Height depends on the Lens)
- Supports digital Video parallel port
- 12 bit Parallel Video Port with SYNC Signals
- Sensor Lens Size - 1/3 "
- RoHS Compliant
- 50-pin SMT Connector
- Wide variety of Interchangeable lenses can be used
- AR0130 - 1.3 Mega pixel (1280 x 960) CMOS Monochrome Image sensor from Aptina / ON Semiconductor.
- Good quantum efficiency at NIR (Near IR Region) – 30% at 850 nm.
- Capable of driving 720p@60fps, 960p@45fps and 640x480@60fps in preview mode
- AWB (auto white balance) and Auto Exposure
- Auto White Balance
- Image quality control(Hue, Gamma, Saturation, and Sharpness)
- Normal, Mirror, Flip support
- 12-bit RAW format with SYNC signals
e-CAM10_CU0130_MOD is particularly suited to the following applications:
- Surveillance cameras for Night Vision and Day/Night Vision applications
- License plate recognition in parking lots
- Iris recognition
- Eye tracking
Download e-CAM10_CU0130_MOD Datasheet:e-CAM10_CU0130_MOD - 1MP Custom Lens NIR Camera Module Datasheet
Download Evaluation Kit (See3CAM_12CUNIR) Documents:See3CAM_12CUNIR - 1.3MP Custom Lens USB 3.0 Camera Board (Monochrome)
1. PC Solution
The USB 3.0 NIR Camera Board, See3CAM_12CUNIR can be bought by customers choosing to evaluate the e-CAM10_CU0130_MOD camera module. Customers who own platforms that support SuperSpeed USB 3.0 port can directly buy the See3CAM_12CUNIR from e-con Systems.
In addition to See3CAM_12CUNIR - USB3 NIR Camera, the evaluation kit comes with e-CAMView - Windows sample application for video preview and still capture along with the UVC Extension features (for Windows XP (with Service Pack 2), Windows 7, Windows 8 and Linux) or QtCAM - sample application for video preview and still capture along with source code (for Linux).
For all enquiries please write to firstname.lastname@example.org
This NIR Camera comes with S-Mount lens holder mounted over the sensor. This allows various compatible M12 lenses to be used with USB3 NIR Camera. Also for customers choosing to use C/CS Lens, there is a provision for connecting C/CS mount Holder, enabling them to replace the S-Mount holder.