e-CAM27_CUNX - Full HD Ultra-lowlight camera for Jetson Xavier™ NX / TX2NX / Nano

• Houses e-CAM21_CUMI290_MOD - Full HD Ultra-lowlight camera based on SONY STARVIS™ IMX290
• S-mount lens holder for choosing a custom lens
• Full HD (1920x1080) @ 120 fps and 60 fps
• Uses NVIDIA® Internal Image Signal Processor (ISP) for image processing
• Operating Voltage : 3.3V +/- 5%
• Operating Temperature Range : -30°C to 85°C
• Power consumption:
  • Max 0.495W
  • Min 0.429W
• Customized LibArgus application for multicamera streaming, image capture and video recording
• Gstreamer-1.0 support for video recording and network streaming
• Base Board size ( L x W ): 75.03 mm x 40.69 mm
• Lightweight, versatile, and portable multi-board solution
• Adaptor board size in mm (l x b) : 30 x 30 (Height depends on the lens)
• RoHS compliant
• Launched on:

• Supported Platforms
  • NVIDIA® Jetson Xavier™ NX, TX2NX and Nano Developer Kits
  • Avermedia's EN715 AverAI carrier board for Jetson Xavier™ NX and Nano
  • ConnectTech’s Photon AI carrier board for Jetson Xavier™ NX, TX2NX and Nano
• Supported Jetpack & L4T Version
• • JetPack 4.5.1 / L4T 32.5.1
• V4L2 Linux driver for MIPI CSI-2 camera module
• • Video preview
  • Still Image capture
  • Camera controls via IOCTLs
• Sample application with source Code for Linux:
• • Video Preview
  • Still Image capture at selected sensor modes (eCAM_argus_camera)
• Camera Controls
• • Exposure (both manual and automatic)
  • Sensor Gain
  • Exposure Time
  • Frame Rate
  • Sensor Mode Index

Kit Contents:

• • e-CAM21_CUMI290_MOD - Full HD MIPI camera module with Lens
  • Adapter Board with 15-pin FFC connector
  • 15 pin FFC cable
• Please contact sales@e-consystems.com for any customization or porting of camera driver to your requirements.

Supported Platforms:

• • NVIDIA® Jetson Xavier™ NX, TX2NX and Nano Developer Kits
  • Avermedia's EN715 AverAI carrier board for Jetson Xavier™ NX and Nano
  • ConnectTech’s Photon AI carrier board for Jetson Xavier™ NX, TX2NX and Nano