Mr. Thomas Yoon
+82-10-5380-0313
See3CAM_130D is an UVC-compliant AR1335 sensor based 13MP autofocus USB camera with iHDR support. It supports 4K Ultra HD (3840x2160) at 30fps over USB3.2 Gen1 in compressed MJPEG format. This See3CAM_130D can also stream Full HD (1920x1080) at 60fps and HD (1280x720) at 60fps in both uncompressed and compressed MJPEG formats. This camera can achieve up to 816fps for custom Region of Interest (ROI) resolutions. This high resolution camera is also backward compatible with USB 2.0, although in USB 2.0, this camera supports fewer resolutions at lower frame rates.
This 13MP autofocus USB camera has a dedicated, high-performance Image Signal Processor chip (ISP) that performs all the Auto functions (Auto White Balance, Auto Exposure control) in addition to complete image signal processing pipeline that provides best-in-class images and video and the MJPEG compression.
Refer
Datasheet for complete frame rate details.
- Key features:
-
- Frame Rate
- Full HD @ 60 fps , 4K @ 30 fps & VGA @ 120fps
- Up to 816 fps for Custom ROI *
Datasheet for complete frame rate details.
- Output format: Uncompressed UYVY and Compressed MJPEG
- Supported OS: Windows, Linux
- iHDR support
- 10 pin GPIO header
- External Hardware Trigger input for 3d sync and External trigger 13MP still capture with Zero-lag-shutter
- Unique ID for each camera
- Lightweight, versatile, and portable two-board solution
- Frame Rate
- Interface:
-
- Interface: USB 3.2 Gen 1 device
- Connector: Type-C reversible interface connector
- UVC Compliant - no additional drivers required
- Backward compatible with USB 2.0 hosts
- Module Features:
-
- Sensor: AR1335 from onsemi®
- Focus Type: Auto focus
- Sensor Resolution: 13MP
- Chroma: Color
- Shutter Type: Electronic Rolling Shutter with global reset mode #
- Optical Format: 1/3.2"
- Output Format: Uncompressed UYVY and Compressed MJPEG
- Focus Distance: 100mm to Infinity
- Pixel Size: 1.2 μm x 1.2 μm
- Sensor Active Area: 4208(H) x 3120(V)
- Array Size: 4208(H) x 3120(V)
- Responsivity: 4700 e-/lux-sec
- SNR: 37 dB
- Dynamic Range: Max upto 69 dB
- FOV: 78.36°(D), 65.23°(H), 51.05°(V) (with the lens provided by e-con)
- Electrical and Mechanical:
-
- Operating Voltage: 5V +/- 5%
- Operating Temperature Range: -30°C to 70°C
- Power Requirements
- Max: 1.85W
- Min: 1.21W
- Size in mm (l x b x h):
- Without Lens: 80 x 15 x 9.67 mm
- Board Weight:
- 7 Grams
- Miscellaneous
-
- Compliance: FCC, RoHS
- Launched on:
- * - Not supported by default. Requires firmware customization for higher framerates with custom ROI resolutions.
- ** - Customers interested to work on Android would require e-con SDK (Webeecam). The specs mentioned above shall not be the same for Android
- # - Rolling shutter is supported in the default firmware. Customized firmware/hardware is required to use a rolling shutter with Global reset mode.
- Supported OS : Windows, Linux
- Sample Application:
- Still Image Resolutions :
-
- 13MP (both MJPEG and BMP)
- Still Capture :
-
- External trigger signal control
- Software application control
- Software trigger
- Zero Shutter Lag Still Capture for 13MP Still image:
-
- 13MP still image in compressed JPEG within 500 milliseconds
- 13MP still image in uncompressed BMP format within 1.5 seconds
- UVC Controls:
-
- Brightness
- Contrast
- Sharpness
- Saturation control
- Gamma control
- Gain
- White Balance (Manual and Auto)
- Digital Zoom (Upto 8x)
- Pan
- Tilt
- Autofocus
- Continuous Autofocus
- Manual focus
- Single trigger auto focus
- ROI selection by user.
- Auto exposure
- Auto and Manual exposure control
- ROI based exposure control
- Denoising ( 5 levels)
-
- Auto
- Normal
- Document
- Effects
- Normal
- Black & White
- Gray scale
- Negative
- Sketch
- Additional Capabilities:
- Support for external trigger
- LED Strobe control
- * - Customers interested to work on Android would require e-con SDK (Webeecam). The specs mentioned above shall not be the same for Android
- ** - For MAC OS support, please contact camerasolutions@e-consystems.com
Customers who own platforms that support USB3.2 Gen1 and are interested in evaluating the 13MP (4K) USB Auto Focus camera module can directly buy the ° from e-con Systems™.
| Part No | Description | Sample Price (1 Unit) |
Purchase |
|---|---|---|---|
| See3CAM_130D | 4K Autofocus USB3.2 Gen1 Camera with Type-C Connector | USD 229 |
|
| See3CAM_130D (5s Pack) |
4K Autofocus USB3.2 Gen1 Camera with Type-C Connector | USD 209 |
|
See3CAM_130D-4K Autofocus USB3.2 Gen1 Camera with Type-C Connector
Sample Price (1 Unit)-USD 229
See3CAM_130D-4K Autofocus USB3.2 Gen1 Camera with Type-C Connector
Sample Price (5 Units)-USD 209
In addition to See3CAM_130D, the evaluation kit comes with e-CAMView (Windows) / QtCAM (Linux) - Sample application for Video Preview and Still Capture along with the UVC Extension features (for Windows 10/11, Linux). For more details, please refer the evaluation kit contents below.
For all enquiries, please write to camerasolutions@e-consystems.com
Kit Contents:
- Hardware:
-
- See3CAM_130D - 13MP USB 3.2 Gen 1 Camera board
- USB 3.2 Gen 1 - Type-C Cable
- Software:
- Documents:
- * - Customers interested to work on Android would require e-con SDK (Webeecam). The specs mentioned above shall not be the same for Android
- ** - For MAC OS support, please contact camerasolutions@e-consystems.com
See3CAM_130D - Customization
- Do you want other customization options?
- Do you want a smaller form factor?
- Do you need LED?
- Complete customization of firmware and hardware as per customer requirements. Please contact us for any customization and additional features.
Employee Login
