e-CAM82_CUQRB5 is a 4K ultra-lowlight MIPI CSI-2 camera for Qualcomm® Robotics RB5 development kit. This Qualcomm camera is based on the Sony STARVIS™ IMX485 CMOS image sensor with a large sensor size of 1/1.2" and pixel size of 2.9μm.
This large sensor size in conjunction with the high resolution of the camera helps to capture better details of the scene of interest. Further, e-CAM82_CUQRB5 comes with superior NIR sensitivity at both 850nm and 940 nm, making it suitable for night vision applications.
e-CAM82_CUQRB5 is a multicamera solution with the ability to connect up to 5 cameras to a single Qualcomm® Robotics RB5 Development Kit.
Refer
Datasheet for complete frame rate details.
- Key features:
-
- Frame Rate:
- 4K @ 30fps
Datasheet for complete frame rate details.
- Standard CS-mount lens holder for use with customized optics or lenses for various applications
- Lightweight, versatile, and portable design
- Frame Rate:
- Interface:
-
- Interface: MIPI CSI-2
- Connector: Micro coaxial cable with I-PEX (CN2) connector
- Cable Length: 30cm
- Sensor features:
-
- Sensor: IMX485 sensor from SONY®
- Focus Type: Fixed focus
- Sensor Resolution: 8MP
- Chroma: Color
- Shutter Type: Electronic Rolling Shutter
- Optical Format: 1/ 2.8"
- Output Format: RAW 10-bit
- Pixel Size: 2.9 μm x2.9 μm
- Sensor Active Area: 3864H x 2180V
- Array Size: 3864(H) × 2200(V)
- Holder: M12 (S-Mount)
- FOV: 33° (D), 29° (H), 15° (V) (with the lens provided by e-con)
- Electrical & Mechanical:
-
- Operating Voltage: 3.3V +/- 5%
- Operating Temperature Range: -30°C to +70°C
- Typical power consumption: TBD
- Size in mm (l x b x h):
- Camera board: 30mm x 30mm
- Miscellaneous:
-
- Compliance: RoHS
- gstreamer based camera application for:
-
- Camera streaming over Ethernet and WIFI (H.264 encoded)
- HDMI streaming (NV12)
- Snapshot image capture in JPEG and RAW Bayer
- H.264 and H.265 encoded video recording
- Camera Controls:
-
- Gamma
- Denoise
- Gain
- Exposure etc.
- Please contact camerasolutions@e-consystems.com for any customization or porting of camera driver to your requirements.
Kit contents:
- e-CAM84_CUMI485C_MOD - Ultra low-light MIPI camera module
- Adaptor board
- Baseboard
- Micro coaxial cable
- CS-Mount to C-Mount converter (Optional)
- Lens (optional)
- Metal enclosure
- Please contact camerasolutions@e-consystems.com for any customization or porting of the camera driver to your requirements.
