News Our Product Insights

13MP MIPI CSI-2 Camera for Jetson TX1

13mp Mipi TX1

Our 13 MP MIPI camera board for NVIDIA® Jetson TX1 development kit is based on our camera module e-CAM130_CUMI1820_MOD. This e-CAM130_CUMI1820_MOD is based on OnSemi’s AR1820HS MIPI CSI-2.0 sensor.

Some of the key features of our 13MP MIPI Camera are:

  • Auto/Manual exposure support along with ISP functions such as brightness, saturation, gain, sharpness etc.
  • 4 lane MIPI CSI-2.0 interface
  • Maximum data transfer rate of 13MP at 20 fps.
  • Also supports 4K UHD at 30 fps and 1080p at 60 fps.
  • Support for Face detection and smile detection as an add-on feature
  • S-mount lens holder for interchangeable lenses as per requirement
  • Supported output formats – YUV422

The Jetson TX1 is the most powerful today and updated sibling of the Jetson TK1 from NVIDIA containing the latest TX1 SoC. Previously we launched our Camera board for the Jetson TK1 – e-CAM130_CUTK1 was highly appreciated by customer and became popular. Now we have brought this same camera module with an even smaller form factor.

Featuring the support for upto 6 MIPI CSI-2.0 cameras, 32 bit and 64 bit  processing on ARM® Cortex® -A57 MPCore (Quad-Core) processor, Jetson TX1 can be very useful for building drones and autonomous robot systems etc. With our camera supporting high resolution camera, will be a perfect accessory with the Jetson TX1 for high resolution imaging and high speed processing. Along with the high processing capabilities of the TX1, a full sized product could be completed with unparalleled ease.

Checkout the following video demonstrating the camera working on the Jetson TX1 kit.

We also provide options to camera customization with your own sensors if necessary. Please contact sales@e-consystems.com with your requirements and we’ll get back to you.

Related posts

11 comments

Ina Krazosi April 27, 2016 at 11:36 pm

How can three of these cameras be hooked up? Your board seems to plug in to camera connector with no provision for expansion.

Is it supported by v4l?

Reply
Dilip Kumar November 16, 2016 at 5:52 pm

Hi Ina,

This adapter board is only meant for testing a single MIPI camera. However we do have another prototype board available for the Jetson TX1 which supports connecting multiple cameras (upto 6). It should be launched shortly. Watch our blog page for more updates.

And yes, the camera can be accessed using any V4L2 application.

Reply
Dilip Kumar January 10, 2017 at 4:08 pm

Check this page for info on connecting multiple cameras on the Jetson TX1.

https://www.e-consystems.com/blog/camera/6-mipi-csi-2-cameras-support-for-jetson-tx1/

Reply
zhiru September 6, 2016 at 7:07 am

Where can I buy these cameras in China?

Reply
Anitha Jothiprakash November 24, 2016 at 10:10 am

Firstly, We haven’t launched this camera yet. Our team is working on it, We will be launching it very soon. Secondly, we don’t have any distributors/Suppliers in China but you can purchase it directly from our Webstore once it gets launched. We ship products to China.

Reply
Anitha Jothiprakash April 25, 2017 at 6:15 pm

We have launched e-CAM130_CUTX1 – 13MP MIPI CSI-2 Camera for Jetson TX1. Please check our online store: https://www.e-consystems.com/webstore.asp#130CUTX1

Reply
Emrah ISSEVER November 3, 2016 at 2:56 pm

Dear Sales, I want to learn “13MP MIPI CSI-2 Camera for Jetson TX1” price.
and I’m from Turkey. Could you dispatch via USPS? Regards

Reply
Anitha Jothiprakash November 24, 2016 at 12:19 pm

Dear Emrah,

We haven’t finalized the price for this product yet. Our product team is working on it. We do ship products to Turkey. We use Fedex/UPS/DHL for shipping. Please write to sales@e-consystems.com for more information.

Reply
Anitha Jothiprakash April 25, 2017 at 6:05 pm

We have launched e-CAM130_CUTX1 – 13MP MIPI CSI-2 Camera for Jetson TX1. Our camera product price is US$299(with out lens) & US$349(with lens). Please check our online store: https://www.e-consystems.com/webstore.asp#130CUTX1

Reply
Robert Mapes January 3, 2017 at 1:52 am

Are you any closer to launching this 13MP MIPI CSI-2 Camera for Jetson TX1

Reply
Dilip Kumar January 19, 2017 at 5:37 pm

Hi robert,

We have launched the 13MP MIPI camera for TX1. Kindly check the following link :

https://www.e-consystems.com/13mp-nvidia-jetson-tx1-camera-board.asp

Reply

Leave a Reply to Ina Krazosi Cancel Reply