Frequently asked questions (FAQ)

Module :

1. What is e-CAM200_CUMI2020_MOD?

e-CAM200_CUMI2020C_MOD is a 20MP camera module equipped with a AR2020 sensor. It is compatible with both the NVIDIA Jetson AGX Orin and Qualcomm RB5 platforms. This camera module is available in different variants, such as the e-CAM200_CUOAGX designed for NVIDIA Jetson AGX Orin platform, and the e-CAM200_CUQRB5 tailored for use with the Qualcomm RB5 platform. For more detailed information about the e-CAM200_CUMI2020C_MOD camera variants, refer our product page. This module comes with advanced image signal processing (ISP) tuning, exceptional NIR performance, enhanced low-light capabilities and versatile platform compatibility, making it well-suited for various applications.

2. What platforms or carrier boards can this camera be connected to?

By default, the camera is compatible with NVIDIA Jetson AGX Orin and Qualcomm RB5. We have hardware support for all other boards and can provide the complete setup upon request.

3. Can I get the support for Orin NX?

Yes, the hardware setup for Orin NX is readily available with us and complete support can be provided on request. Please write to us at camerasolutions@e-consystems.com to raise the request.

4. Does e-CAM200_CUMI2020C_MOD run in super low power mode?

The AR2020 sensor can operate in a super low power mode, and this feature will be added to e-CAM200_CUOAGX and e-CAM200_CUQRB5 in the future.

5. Does e-con support Isaac ROS for this camera?

Yes, e-con Systems supports Isaac ROS for this camera. To learn more about NVIDIA Isaac ROS, please visit the article What is the NVIDIA™ Isaac ROS? How to get started with it?

6. Does this camera come with an onboard ISP?

This camera doesn't have an onboard ISP and instead utilizes the NVIDIA Jetson ISP when connected to Jetson platforms.

7. What is the Quantum Efficiency of this camera in NIR region?

The QE is 60% in the NIR region.

8. Does the camera come with low-light feature?

Yes, the AR2020 sensor comes with an enhanced low-light feature, performing well in low-lighting conditions.

Enclosure :

9. What is the cable provided with this camera?

The camera comes with a 30cm Coax I-PEX cable.

10. Does this camera module come with an enclosure?

The camera module doesn't come with the enclosure, but e-con can customize the enclosure according to your requirements. Also, e-con will soon launch a GMSL version with IP67-rated enclosure.

Interface :

11. I need an IP67-rated AR2020-based camera Module. Can e-con Systems support?

Yes, e-con Systems can support your need for an IP67-rated AR2020-based camera. The STURDeCAM200, based on the AR2020 sensor and featuring a GMSL interface, will soon be available with an IP67-rated enclosure.

Lens :

12. Are there any other interfaces available for AR2020-based cameras?

By default, the camera comes with the MIPI interface. However, it can be customized with other interfaces like USB, FPD LINK III, or GMSL2 upon request.

13. Are there different lenses available for e-CAM200_CUMI2020C_MOD?

Yes, e-CAM200_CUMI2020C_MOD comes with specific lens options, and additional options can be provided upon request. Contact camerasolutions@e-consystems.com for more information.

Customization :

14. What type of lens holder does this camera have?

The default lens holder for e-CAM200_CUMI2020C_MOD is an S-mount lens holder. However, e-con can provide customization to a C/CS mount lens holder based on specific requirements.

15. What support does e-con Systems offer with the camera?

e-con Systems provides basic evaluation support and can customize the camera's hardware, software, and firmware to meet your requirements.

16. Can e-con Systems adjust the camera for specific image quality?

Yes, e-con Systems holds the expertise to fine-tune the image quality on the desired platform, especially in the area of ISP tuning, aligning with your specified requirements.