See3CAM_CU135M - 4K Monochrome USB 3.1 Gen 1 Camera

• Key features:
• • Frame Rate: Streams Full HD @ 60 fps & 4K @ 30 fps
    Refer Datasheet  for complete frame rate details.
  • Supported OS: Windows, Linux, Android* and MAC **
  • 10 pin GPIO Header
  • External Hardware Trigger Input
  • Lightweight, versatile, and portable two-board solution
  • Unique ID for each camera
• Interface:
• • Interface: USB 3.1 Gen 1 device
  • Connector: Type-C reversible interface connector
  • UVC Compliant - no additional drivers required
  • Backward compatible with USB 2.0 hosts
• Module features:
• • Sensor: AR1335 from onsemi®
  • Focus Type: Fixed focus
  • Sensor Resolution: 13MP
  • Chroma: Monochrome
  • Shutter Type: Electronic Rolling Shutter with global reset mode ^#
  • Optical Format: 1/3.2"
  • Output Format: Y8 & Y16
  • Pixel Size: 1.1μm x 1.1μm
  • Sensor Active Area: 4208 (H) x 3120 (V)
  • Array Size: 4208 (H) x 3120 (V) Pixel
  • Responsivity: 8000 e-/lux-sec
  • SNR: 37 dB
  • Dynamic Range: 69 dB
  • FOV: 66.8°(D), 55.6°(H), 42.8°(V) (with the lens provided by e-con)
• Electrical and Mechanical:
• • Operating Voltage: 5 V +/- 5%
  • Operating Temperature Range: -30°C to 70°C
  • Power Requirements: Max: 1.210W, Min: 0.780W
  • Size in mm (l x b x h):
    • Without Lens: 30 x 30 x 30.2 mm
  • Board Weight:
    • Without Lens: 13 Grams
    • With Lens: 21 Grams
• Miscellaneous:
• • Compliance: FCC, RoHS
• Launched on:
• * - Customers interested to work on Android would require e-con SDK (Webeecam). The specs mentioned above shall not be the same for Android
• ** - For MAC OS support, please contact camerasolutions@e-consystems.com
• # - Rolling shutter is supported in the default firmware. Customized firmware/hardware is required to use a rolling shutter with Global reset mode.

• Supported OS - Windows, Linux, Android ^* and MAC ^**
• Sample Application:
• • e-CAMView – Windows Camera application for Video Preview and Still Capture.
  • QtCAM – Linux Camera application for Video Preview and Still Capture.
• Still Image Resolutions:
• • All supported resolutions (Y8 & Y16)
• Still Capture:
• • External trigger signal control
  • Software application control
  • Software trigger
• UVC Controls:
• • Gain
  • Exposure (Manual)
  • Roll
• Additional Capabilities
• • Stream Mode
  • Flash Mode
  • Orientation Mode
• * - Customers interested to work on Android would require e-con SDK (Webeecam). The specs mentioned above shall not be the same for Android
• ** - For MAC OS support, please contact camerasolutions@e-consystems.com

Customers who own platforms that support USB 3.1 Gen 1 and are interested in evaluating the 13MP USB camera module can directly buy the See3CAM_CU135M from e-con Systems.

Part No	Description	Sample Price (1 unit)	Purchase
See3CAM_CU135_MHLCC_H01R1	13MP Fixed Focus USB 3.1 Gen 1 Monochrome Camera (With Auto Exposure)
See3CAM_CU135_MHLCC_H03R1	13MP Fixed Focus USB 3.1 Gen 1 Monochrome Camera (Without Auto Exposure)	USD 189

In addition to See3CAM_CU135M, the evaluation kit comes with e-CAMView (Windows) / QtCAM (Linux) - Sample application for Video Preview and Still Capture along with the UVC Extension features (for Windows 8.1/10, Linux, Android * and MAC **). For more details, please refer the evaluation kit contents below.

For all enquiries please write to sales@e-consystems.com

Kit Contents:

• Hardware:
• • See3CAM_CU135M - 13MP Monochrome USB 3.1 Gen 1 Camera with M12 Lens (S-Mount) Holder
  • USB 3.1 Gen 1 Type-C Cable
  • Lens (Optional)
• Software: (Customers will have to download the software from e-con Developer Resource)
• • Supported OS: Windows 8.1/10, Linux, Android ^* and MAC ^**
  • e-CAMView (Windows) / QtCAM (Linux) - Video Preview and Still Capture Application
• Documents:
• • See3CAM_CU135M - Hardware and Software documents
• * - Customers interested to work on Android would require e-con SDK (Webeecam). The specs mentioned above shall not be the same for Android
• ** - For MAC OS support, please contact camerasolutions@e-consystems.com

See3CAM_CU135M – Customization

• Do you need a Support for external mechanical shutter?
• Do you need a Custom lens mount (C-mount/CS-Mount)?
• Do you want a smaller form factor or single board solution?
• Do you need LED flash?
• Complete customization of firmware and hardware as per customer requirements. Please contact us for any customization and additional features.