• Developer Resources   
 
 

e-CAM22_CUXVR - Sony® STARVIS™ IMX327 Ultra Low-Light MIPI Camera

e-CAM22_CUXVR is a Full HD ultra-low light MIPI camera solution for NVIDIA® Jetson AGX Xavier™ developer kit. This camera solution is based on the camera module e-CAM220_CUMI327_MOD, a Sony® STARVIS™ IMX327 color CMOS image sensor. Its high sensitivity helps to brings out extraordinary color images even in absolute darkness. This high sensitivity ultra low light camera can also perform exceptionally well in both visible and near infrared region (NIR). This Starlight Camera uses NVIDIA® on-board Jetson Xavier Image Signal Processor (ISP) to perform all the Auto functions (Auto White Balance, Auto Exposure control) and significantly improve quality.

  • Houses e-CAM220_CUMI327_MOD - 2.0 MP Sony® Starvis Camera Module with S-mount lens holder
  • High-speed 4-lane MIPI CSI-2 interface product variants to connect with the CPU
  • Plugs in to NVIDIA® Jetson AGX Xavier™ development kit
  • Uses NVIDIA® Internal Image Signal Processor (ISP) for image processing
  • Maximum Image Transfer Rate
  • Resolutions UYVY
    HD (1280 x 720) 30 fps
    FHD (1920 x 1080) 30 fps & 60fps
  • Operating Voltage : 3.3V +/- 5%
  • Operating Temperature Range : -30°C to 85°C
  • Power consumption: Max 1.940W, Min 1.650W (Streaming four Cameras on NVIDIA® Jetson AGX Xavier™)
  • Customized LibArgus application for multicamera streaming, image capture and video recording
  • Gstreamer-1.0 support for video recording and network streaming
  • Base Board size ( L x W ): 75.03 mm x 40.69 mm
  • Lightweight, versatile, and portable multi-board solution
  • Adaptor board size in mm (l x b) : 30 x 30 (Height depends on the lens)
  • Micro-Coaxial Cable Length : 30 cm (1m *)
  • RoHS compliant
  • Launched on:launch date
  • * - 1-meter cable will be available on special request.

Sensor:1/2.8" Optical format CMOS Image sensor

Focus Type:Fixed focus

Resolution:Full HD

Pixel size:2.9 μm x 2.9 μm

Sensor Active Area:1945H x 1097V

G sensitivity:2.376 V @ 12-bit HCG mode, 0.921 V @ 12-bit LCG mode

Output Format:RAW 12 bit

Shutter type:Electronic Rolling Shutter

Holder:S-Mount

ISP:External ISP

DFOV :Full HD - 132°(with the lens provided by e-con)

Linux camera driver:


Full-fledged Linux camera driver for MIPI CSI-2 camera module. The driver supports e-con's e-CAM22_CUXVR on NVIDIA® Jetson AGX Xavier™ developer kit.

  • Supported Jetpack & L4T Version
    • Xavier - JetPack 4.4.0 L4T32.4.3
  • V4L2 Linux driver for MIPI CSI-2 camera module
    • Video preview
    • Still Image capture
    • Camera controls via IOCTLs
  • Sample application with source Code for Linux:
    • Video Preview
    • Still Image capture at selected sensor modes (eCAM_argus_camera and eCAM_Argus_MultiCamera)
  • Camera Controls
    • Exposure (both manual and automatic)
    • Sensor Gain
    • Exposure Time
    • Frame Rate
    • Sensor Mode Index

Please contact sales@e-consystems.com for any customization or porting of camera driver to your requirements.

Download e-CAM22_CUXVR - Technical Documents:

 Bullat Arrow  Datasheet

pdf e-CAM22_CUXVR Datasheet

pdf e-CAM22_CUXVR Lens Datasheet

 Bullat Arrow  User Manual

pdf e-CAM22_CUXVR Getting Started Manual

pdf e-CAM22_CUXVR Developer Guide

pdf e-CAM22_CUXVR Gstreamer Usage Guide

pdf e-CAM22_CUXVR Release Package Manifest

Download Selected Documents

Kit Contents:

  • e-CAM220_CUMI327_MOD - 2MP MIPI Camera Module with lens
  • Adaptor board
  • Base board
  • Micro Coaxial Cable
  • Linux Driver & Sample Application

Please contact sales@e-consystems.com for any customization or porting of camera driver to your requirements.