HomeCamera Modules13MP MIPI Camera Module

e-CAM130_CUMI1820_MOD – 13MP AR1820HS MIPI Camera Module

e-CAM130_CUMI1820_MOD is a 13MP MIPI Camera Module. This small form factor 13MP camera module based on AR1820HS – an 18MP CMOS Image sensor from onsemi® and has a dedicated, high-performance Image Signal Processor chip (ISP) on-board that performs all the Auto functions (Auto White Balance, Auto Exposure control) in addition to complete image signal processing pipeline that provides best-in-class images and video and the optional MJPEG compression. Though the AR1820HS is an 18MP image sensor, the e-CAM130_CUMI1820_MOD supports only up to 13MP resolution.

Updated Part Number for this product

e-CAM180_CUMI1820_MOD - 18MP AR1820HS Camera Module

MIPI Camera Modules | 4K Camera Modules

Key Features
Sensor Features
Interfacing
Documents
Evaluation Kit
Customization

13MP Colour camera with 4-lane MIPI CSI-2 interface
1/2.3" Optical Form-factor
Uncompressed YUV streaming and compressed MJPEG streaming
S-mount interchangeable lens holder for flexibility to choose a lens as per application requirements
LED Control signals and STROBE output signal for firing the illumination LED
External Trigger input
Face detection capability
Maximum Image Transfer Rate* YUV422 Output Format

Resolutions	USB 3 Interface For PC solution	MIPI Interface For NVIDIA Jetson TK1
VGA	60 fps	60 fps
HD (720p)	60 fps	72 fps
Full HD (1080p)	30 fps	72 fps
Ultra HD (3840x2160)	9 fps	30 fps
13MP (4224x3156)	5 fps	20 fps

Small form-factor
30mm x 30mm size. Height depends on the Lens
2x 20-pin SMT Connectors on two sides of the camera module for better mechanical stability
Compliance
- FCC
- RoHS
Power consumption of Camera Module Board : 1.37W (Approx)
Launched on:
* - The maximum frame rate depends on the application processor ability to read the camera image, decode and display, in addition to the ambient light of the scene

AR1820HS - CMOS Image Sensor from onsemi®
1/2.3" optical form-factor
1.25 µm pixel size with onsemi® A-PixHS™ BSI technology
Other still capture modes:
Electronic Rolling Shutter
Responsivity: 0.62V/lux-sec
Dynamic Range: 65.8 dB
SNR_MAX : 36.3 dB

4-lane MIPI CSI-2 interface for video and I2C interface for camera configuration
Dual 20-pin connector on board to plug in to customer boards directly
Direct Interface to NVIDIA Jetson development kit through e-CAM130_CUTK1 daughter card
Daughter card for NVIDIA Jetson Kit available immediately
Linux V4L2 Capture driver with demo application
Customers can purchase the driver source code from e-con Systems™ and port the same to their application processor.
Please contact sales@e-consystems.com for customization requirements.

Evaluation Kit:

1. PC Solution

See3CAM_CU130 - 13 MP Custom Lens USB 3.0 Camera

Customers who own platforms that support USB 3.0 and are interested in evaluating the 13 mega pixel USB UHD camera module can directly buy the See3CAM_CU130 from e-con Systems™. Customer can order See3CAM_CU130 with/without lens.

2a. ARM Based Solution (NXP/Freescale i.MX6)

ACC-iMX6-CUMI1820CAM - 13MP MIPI Camera Board (Requires Ankaa kit):

The daughter card (ACC-iMX6-CUMI1820CAM) can be bought by customers choosing to evaluate the e-CAM130_CUMI1820_MOD camera solution with a direct interface on the Ankaa.

Read more about Ankaa - iMX6 development board solution that features eSOMiMX6 - computer on module & carrier board.

The evaluation kit comes with Sample application for Video Preview and Still Capture (Linux / Android).

2b. ARM Based Solution (NXP/Freescale i.MX6 Micro)

ACC-iMX6-m-CUMI1820CAM - 13MP MIPI Camera Board (Requires Meissa-I kit):

The daughter card (ACC-iMX6-m-CUMI1820CAM) can be bought by customers choosing to evaluate the
e-CAM130_CUMI1820_MOD camera solution with a direct interface on the Meissa-I.

Read more about Meissa-I - iMX6 Micro development board solution that features eSOMiMX6-micro - computer on module & carrier board.

2c. ARM Based Solution (NVIDIATegra K1)

ACC-TK1-CUMI1820CAM - 13MP MIPI Camera Board (Requires Propus kit)

The daughter card (ACC-TK1-CUMI1820CAM) can be bought by customers choosing to evaluate the
e-CAM130_CUMI1820_MOD camera solution with a direct interface on Propus.

Read more about Propus - Tegra K1 Development Board solution that features eSOMTK1 - computer on module & carrier board.

2d. ARM Based Solution (NVIDIA Tegra X1 based Jetson DevKit)

e-CAM130_CUTX1 - 13MP MIPI Camera Board (Requires NVIDIA Tegra X1 based Jetson DevKit):

The MIPI Camera daughter card (e-CAM130_CUTX1) can be bought by customers choosing to evaluate the e-CAM130_CUMI1820_MOD camera solution with a direct interface on the NVIDIA Tegra X1 based Jetson DevKit.

Customers interested in customizing the same camera module or planning to use a different camera/sensor module can contact sales@e-consystems.com and explain their requirement.

e-CAM130_CUMI1820_MOD - Customization for other Application Processor platforms:

e-con provides customization for this e-CAM130_CUMI1820_MOD on any application platform as per customer requirements. Please contact sales@e-consystems.com along with your requirement details.

e-CAM130_CUMI1820_MOD Customization

e-con provides customization for the following requirements:

PCB form-factor customization for any shape, connector and orientation
Lens holder customization for C/CS mount lens holder
Driver development for any OS: Linux, Android
Interfacing with any Application Processor : Freescale i.MX6, NVIDIA Tegra K1 and any other processor
Camera and ISP features customization based on specific requirements

Please contact sales@e-consystems.com for customization requirements.

We use cookies to ensure that we give you the best experience on our website. You can change your cookie settings at any time but our site requires cookies to function properly.
You may not be able to access content or other services correctly without cookies. Know more

We use cookies to ensure that we give you the best experience on our website.

e-CAM130_CUMI1820_MOD – 13MP AR1820HS MIPI Camera Module